Bought an old home...I loving refer to as my retirement bank..124 years old. If your husband or you have any carpenter skills or a family member who loves you a lot...look for old doors that includes barn doors that are too large...cut them down or refigure to size...its custom. You did it...wood is thicker and better....paint them all the same color....instant character. Or start with the one that is the worse problem...see how it goes...mine are beautiful...add something different and built to last. Most were $25.00 to $50.00 except the front door..but new doors they are thin...not real wood and to me cheap . its work to sand strip and measure ....make sure to measure about five times...keep in mind old homes are not square...but for us it worked...old doors you pick up for almost nothing aren't either. I made paper doors to take with me to lay on top of old doors to see how it would be...that wasn't easy but used old cardboard first and butcher paper taped together I could fold and take. You can check the height of the door knob which is important I found out..we have a door that we mismeasured and it like a dutch door I think they call them top opens and bottom opens or together..it goes from kitchen to dinning room so like a pass through. Which worked out to look good but what a headache..so the butcher paper template is a must. You are in for a lot of work and fun...as long as you know. Just about anything can be changed someway to work...diy magazines and web sites are educational...good tools...borrowed or hope for as a gift a blessing...renting if your sure you can get it done in a day is an option. Lots of info...custom doors start at least at 200 where I live uninstalled not real wood...for us this made sense...not for everyone...we love our house or recycled doors.good luck...doing it make you love it more.

I would suggest you take out the cabinet that is to the right of the stove and use it elsewhere in the house -- perhaps in the bathroom or dining room with a hutch above it. Then, I would suggest you have someone install a lazy susan cabinet in the corner between the sink counter and the stove, meaning you would move the stove down a bit and have a small cabinet/counter top to the right of the stove. I would suggest you have the cabinets refinished in white and then paint the walls a pastel you like. If you would prefer white walls, then add white-painted crown molding and paint the ceiling a light neutral blue, such as Sherwin Williams Niagara Falls Blue. Then, I would suggest you choose a favorite accent color and use this sparingly in accessories like towels, pot holders, small vases or floral arrangements, and a valence above the triple windows. For a genuine 1940s look, you might have white ceramic square tiles with a rectangular red border installed as a back splash behind and above the stove. If you are replacing counter tops, I would suggest a light color such as white with a beige or light grey vein or striation for some sort of pattern. You might be able to find the same color and design in floor tile OR opt for a wood floor as another poster suggested.

Well done, what an improvement!

We are planning a new house, and have chosen a soft grey melamine kitchen with perfectly plain cupboards, and darkish handles with coppery hightlights. The bench-top is a new ceramic tile type of material in a slightly darker grey/concrete color, with coppery highlights through it - very nice. We have discussed having the center island a darker color as this is very visible from the dining room, and thought it would be a nice feature. There will be a copper colored Formica under the servery for a highlight, and the cupboards facing the dining room on each end of the unit will be the darker wood or melamine. The only thing we have been offered to use for the cupboards and each end on the unit is charcoal wood grain finish melamine, but now we are getting cold feet. Has anyone seen this used, and would it look a bit cheap...? Would it cost much more to use a proper wood...? raewyng