1. Turn over the frames so you are looking at the back. Make sure the hangers are attached correctly. I've had some where it was put on crooked which throws everything off. 2. Line up the frames in the order you want them--spacing etc. 3. Double check the order and spacing. 4, Run masking tape the full width of the group. (If 5 frames, run across all five, maintaining spacing, etc.) Insert nail to puncture the tape. 5. Remove nails; carefuly remove tape and put on wall. 6. Center; level and done

Bought an old home...I loving refer to as my retirement bank..124 years old. If your husband or you have any carpenter skills or a family member who loves you a lot...look for old doors that includes barn doors that are too large...cut them down or refigure to size...its custom. You did it...wood is thicker and better....paint them all the same color....instant character. Or start with the one that is the worse problem...see how it goes...mine are beautiful...add something different and built to last. Most were $25.00 to $50.00 except the front door..but new doors they are thin...not real wood and to me cheap . its work to sand strip and measure ....make sure to measure about five times...keep in mind old homes are not square...but for us it worked...old doors you pick up for almost nothing aren't either. I made paper doors to take with me to lay on top of old doors to see how it would be...that wasn't easy but used old cardboard first and butcher paper taped together I could fold and take. You can check the height of the door knob which is important I found out..we have a door that we mismeasured and it like a dutch door I think they call them top opens and bottom opens or together..it goes from kitchen to dinning room so like a pass through. Which worked out to look good but what a headache..so the butcher paper template is a must. You are in for a lot of work and fun...as long as you know. Just about anything can be changed someway to work...diy magazines and web sites are educational...good tools...borrowed or hope for as a gift a blessing...renting if your sure you can get it done in a day is an option. Lots of info...custom doors start at least at 200 where I live uninstalled not real wood...for us this made sense...not for everyone...we love our house or recycled doors.good luck...doing it make you love it more.

If you are planning on having this built you need to discuss it with the carpenter and have him draw up plans. If you are looking for premade cabinetry it is doubtful you will find something that will accommodate the pole. We would be able to make further suggestions once you have a plan for the cabinet as far as storage and design. From what you are looking for I suggest a full wall built in cabinet customized for your needs.

Any rod will work that does not have decorative finials. A U shaped rod. I would prefer sheers and drapery that go to the floor. But you can use what you have also. A roman shade can take the place of the sheers and mounted inside the frame. You can use ring clips for the drapes for easy opening and closing. Thank you for the new photos.