Hi definitely remove the x bars on the deck balustrade. Landscape close to the house so it grounds the house. Trees will make it look less bare. Chose some that work for your area, that are evergreen, and are not going to grow really big. With a really plain house - dark colors will make it look better. Dark Grey, or black with a warm tone so it doesn't have a blue undertone in it. Make sure it is a warm grey or black. Use green foliage around it. Paint out the pergola in the dark grey too or white if you want a different look. Fill in the balustrade where the x is removed with plants in front of those areas. Grow a vine up the pergola that is nice.

Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

I didn't like any of the stock standard vanities I saw being sold. By chance I happened to see a second hand vanity being sold on FB so I brought it ( see photo). I liked its shape and solid profile but didn't like its colour. I took it to a auto car spray painter and had them spray paint it in Benjamin Moore Kendall Charcoal (a greige grey). They did an awesome paint job with a mirror like finish. I brought a piece of primestone (marble look) for the top, two small towel rails to be fixed in the underside of the vanity that is sticking out so I can hang hand towels on either side. I brought a new tap for it (but kept the vessel basin). I ordered in some new legs for it online because I didn't like the legs on it (see below). Its currently at a joiners getting put together. I've actually enjoyed the process of pulling it all together. Sure by the time it has been put together I probably would have spent the same amount that it would have cost me to do a custom vanity however I think there is something to be said for re-using something a second time round rather than buying into consumerism that abounds us. All up I've spent $1,074 NZD for the vanity, the spray paint job, new legs from www.prettypegs.com, the new towel rails from Reece Plumbing & buying a new Elementi tap. That doesn't include the joiners costs - yet. I needed storage in my vanity. This one fit the bill for me. Good luck with what you choose to do! I am doing a bathroom remodel as well and enjoying it.

I wouldn't do skirtings . I'd do the floor tile for '1 tile' up the wall ( assume they are 200 x 200 or 300 x 300 -- cut them if 400 or 600 ) . Personally , I'd probably even do the 'silver' tiled areas in that 1 height darker tile too , as it would make the whole room look more 'level' , but thats up to you and your tiler .