~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

Hi anne, that's what I was originally thinking, my issue is what colour I use for the 'pop' :) I keep coming back to a teal/turquoise colour (it's one of my favourite colours!!), I love blues, purples, teal/turquoise - many on here have suggested yellow but I'm really not sure about it. Here in New Zealand we're in Autumn, nearing Winter so uncertain about the yellow. I found these cushions that I've fallen in love it, and wondering how I could make these work.. do I try teal and mustard together, as an interior designer suggested?

Moss. Preferably the thick dense dark green kind of moss that looks like a carpet that grows on the north side of embankments where little sun reaches. How close is your nearest state or national forest or, in the alternative, the nearest dirt road with an embankment that gets little if any sun because of shade trees. Take a drive and/or walk and see what kinds of moss you can find and take some pics. A dozen or so pieces would likely be all you need to get it started because, with the right conditions -- shade and moisture -- it spreads. (Ferns like shade but usually do better with drainage. Moss likes damp but will not grow in a puddle.) Where you have windows, you could create a "view" : With a concrete planter (or on concrete pavers set a large clay planter) with a trellis with English ivy. Alternately, you could buy your own pieces of exterior grade plywood and use deck screws to affix them to the fence posts and horizontal supports of the fence and decorate them w/paint and/or planters and/or metal sculpted art --- get creative.

I am trying to source (in New Zealand) a shower tray which will fit into my alcove Sized 1900x1000 for the shower. Thus far for that size (and I have searched online and in merchants) found only tiled over solution to completely cover floor space. Not totally happy to have this as feel that tiles will be slippery when wet. Whereas have found smaller acrylic trays that are described as non slip even tho they are smooth. Can anyone suggest a supplier that they have used for trays and hinged/pivot doors of the size I require? Or if place a shorter acrylic tray to the length (probably 1200mm) of the glass wall, as will create a walkin with what do I cover the remaining 700mm of the alcove floor? The bathroom floor will not be any kind of tile, more likely to be a textured vinyl plank.