Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

And I would be planting trees – real trees not dwarf versions of trees and no more palms (unless you want to have palm tree themed garden – in which case a lot more palms are needed). I am not advocating planting forest giants but there are trees that will provide shade, shelter and a sense of scale that you won't get from yuccas and buxus and mondo grass and succulents alone. But before you start buying those trees you have a few decisions to make and a bit of analysis to do. 1. Orientation – you need to understand the basics of winter sun and summer sun, how much westerly sun you welcome and how much you need to shelter from it; where your prevailing winds blow from and whether this changes with the season also. So, once you've worked out where you want the sun to penetrate and at what time of the year, how to allow for wind, frost, whatever... you need to 2. Decide if you want a predominantly native garden, a range of deciduous trees or a completely eclectic selection (like the best 'English' gardens – which are planted out with plants from all over the world – Indian subcontinent, Asia, Africa, The Americas etc. Even some from Australia!). 3. Now the tricky bit – what do you love, i.e. which trees and plants make your heart really sing – and hopefully for more than two or three weeks of the year? Once you have that list which of those are likely to be happy in your climate, in your soil and with the amount of gardening attention (watering, feeding, pruning etc) that you're likely to enjoy lavishing on them. Your long list will by now be a much shorter (and more manageable list) but trees are what make a house look bedded in and part of a landscape rather than just sitting out in the open in a way that is both self-conscious and a bit awkward. Although, again I guess you could embrace the suburban awkwardness and go all Howard Arkley in which case keep it all small and suburban... But it is your garden and your house – make it look like what you want your house and garden to look and feel like! Good luck!

Hi. We moved into our home in Central Otago in 2013. It had been built around 2000 and clad with Oregon and Plaster. It was evident that this house was tired with the most pressing need the rescuing of the Oregon cladding. It was well overdue for a recoat. On much appreciated advice from a Resene Rep we bleached (Moss and Mould Killer) and scrubbed (Timber and Deck Wash) then coated with Resene Waterborne Woodsman in Nutmeg with CoolColour, This took up my summers of 2014, 2015 and part of 2016 the remainder of which was taken up overhauling the plaster. This summer I have tied in the entrance slat fence. Unfortunatelyn we were let down by Resene in early 2015 with an unannounced change of formula resulting in out of stocks and worst of all colour changes. Nutmeg which previously was a warm brown definitely moved into the orange spectrum. Resene WW is meant to be recoated every 18-24 months so strictly speaking I can't physically keep up with the staining let alone have a life as well. Stripping back is not an option, no no no. What compatible product would you recommend that definitely lasts longer than Resene WW? Where can I find LRV for Resene WW in case I need to stick with that but change the colour? Sadly I can't find information on comparing products across brands as reps only compare between their own products. Many thanks.

Hi there, this is very touch. But you have discovered the base principle already, soft materials or materials with a lot of surface area absorb the sound. Just shooting out some quick ideas here for you: A soft and thick rag or bath Matt on the floor. Curtains are a good sound absorber, but not to much in a moist bathroom. Potential mold issue ;-) Another idea could be to hang bathrobes on hooks or a fabric laundry hamper onto the back of your door. If you find its still not enough.... since your walls are already tiled. you could do something on your ceiling... like a timber slat ceiling or a painted plywood paneling with holes in it. Make sure you use polycaprithane paint for moisture protection on the timber.... hope this helps. If there are questions or you need more help, feel free to send me a message. Cheers Gunnar