Those ideas are great / what a difference already. We were thinking of ranch sliders/ bi folds right along the front and taking out the triangular windows at the top as they are off set and filling that in with lineaboard painted a copper colour, and adding a more extensive deck. Thinking of taupe/grey paint on the roughcast at the bottom and lighter lineaboard or of the same taupe/grey at the top. Copper colours on the garage door, on the linea joins on the top half and around the soffits. What about the garage door being a block design e.g 5 x 4 block type look?Then it would match the entrance door. and covering in the windows at the bottom ( that's all garage underneath and is well lit with lights inside ). the outside light looks cool - maybe in copper? are you able to produce that for us, we would love to see if the concept works. Thank you.

The house looks very livable. I love that you have concentrated on creating one nice bath with separate walk in shower and a windowed tub! Since you have already thought of it, I'm going to assume that the attic is for future expansion and cannot be adapted for use as the current "away room." We are also in the process of designing a small house, and we've designated our study as the "away room." Ours will open off the dining room. If you switched the locations of the Study and Bed 1 on the same side, you could put french doors or an extra wide door with etched or decorative glass from the hallway into the right hand corner of the study. This would give you a really long diagonal view through the lounge and out the french doors, and from the lounge through the study to the window at the far end... The study window should be increased in width to match the neighboring window in Bed 1, and it then becomes ripe for a small window seat, either a clip on bay bumping out, or a "built-in" bay using narrow built ins on either side. Or both: build "in" for now, putting file cabinet drawers under the window seat, and angled corner units in for storage, and add the bump out bay later when you know whether your offspring would prefer a really cute desk, or a window seat, or a bed nook. You would, alas, lose the door from Bed 1 into the bath.... but honestly, there are lot of doors into that bathroom already, and that one has substantial collision potential. It might be best to make the single access point that door from the laundry. Either a glass panel set high in the bath room doors or a transome would make it easy to tell when someone is in the loo. Other ideas would be to split the nook under the stairs, so that half the depth opens to the lounge, and the other half to Bed2... with the wall thickness, you probably get close to 600mm or 2' on each side. Add a deep bookcase or other built in, and you're easily at a depth that makes both spaces very tucked in. Lastly, if funds allow a shallow bay window over the kitchen sink would visually expand the kitchen, particularly if you could arrange it so that the counter runs right into the bay.

This is why it's always good to have a pro to hold your hand for at least some of the way, (carefully chosen though, check out his/her finished projects, the more varied the styles, the better she/he will be able to understand and adapt to your desires), they can provide the invaluable visual supports too. When it's your own house it's notoriously difficult to see the possibilities, you have it under your eyes the whole time and the defaults shout at you and prevent you being able to see it objectively and envisage the possibilities. you're emotionally involved and emotions always have the upper hand on the brain, so you just keep turning round in circles. Something akin as to why a psy must never attempt therapy on a member of his own family, if you follow me :D As for the façade color, are you sure it needs changing that much ? Once those thick white frames have gone and the new windows nestling more discreetly, correctly positioned and re-proportioned, the aspect will change drastically and be far more streamlined and modern. (the devil is in the detail) I'd also strongly suggest that the wood facing just breaks off around the windows, no framing or finishings. Same thing for all the windows, the small ones too. Entrance : Same as for the windows, that outer frame shouldn't be touching the ceiling, you can try taking that off and painting the door another color before deciding to change it and once again the door could do with setting back a little. You could maybe take that doorstep out while you're at it. Also, i don't know what is happening to the right of the door but i see the concrete steps leaing up and feel it would be good to create another level to make it flush with the bottom of the door if structurally possible. This would tie it all in better and you probably wouldn't need any additional definition to your entrance. Anyhow, as i often quote, i'm a firm believer in " Less is More " , and vice versa of course ^^ Question #4 i can't answer as i haven't really understood the problem And #5 i don't think so, but once the other transformations have been taken care of i think you'll find it speaks for itself. Whatever, it's a very exciting project, the bones are great and i'd love to see photos of progression once you get started.

Possible suggestions if sticking to same floor plan and hands firmly glued to the budget Leave the stove where it is. Down the side of the stove securely attach slimline fireproof panelling to the height of the oven's back control panel and the depth of the oven. Floor to ceiling if you prefer then if you wanted to you could change out the door itself, that is put the door handle to the right of the door so it swings back flush with the fireproof panelling. Put the dishwasher under the stainless steel bench top left of the sink. Take all the cabinetry out where the dishwasher is currently housed place the fridge in the centre of that wall building functional cabinetry around it. Get rid of the cupboard at the end of the stainless steel bench replace it with a wheeled butchers block the same width and depth of bench also have hinged sides so you can get extra useable bench top surfacing. You could then wheel it around include brakes on it of course so little hands don't go racing around with it.