The mosaics behind the vanity are called extra light diamond from Rex. I have added the website http://www.rex-cerart.it/en/extra-light/ The tiler will screed the wall in white so no other colour comes through and then use an adhesive in white and then grout. I have sealed the grout also as white grout can discolour. You will see on the website some amazing applications of this little glass mosaic. Happy hunting

You are so right white is never out of fashion. I would set your budget and then look at your options. If you plan to stay in the house for many years then spend to the top of your budget (if that is going to give you a life time of pleasure), if you plan on being at the home for only a short time / few years then I would go mid range so it looks lovely, will have good resale value but you can invest your well earned money to go towards something else as well. Obviously Marble / Granite is the top of the range but there are so many cheaper and very attractive options these days that look just as good.

Hope post shows, got some weird error message

I love the look of Tand G as the real thing or the 'James Hardie' NZ groove panels..........but also want my ensuite to look opulent. I am not having tiling anywhere in this room, which would be the easiest solution. Hence my dilemma..... I already have chosen the white 'tile look' acrylic walls with a feature 'marble' (narrow) panel in the shower alcove enclosure from the 'Atlantis' range. The alcove covers the complete width of the bathroom so is a feature in itself. I wanted to bring the 'marble 'feature' into the room if I could to enhance the opulence. The marbling is minimal veining on a white background so not too dramatic a feature. The obvious area is to use a matching 'marble' vanity top and/or a splash back (especially if have a china vanity top, which is the more likely due to cost). Where should the splashback end at the sides? I thought about taking the 'marble' splashback above the mirror to the ceiling thus creating a similar panel feature to that in the shower albeit wider but don't know how much wider it should be than the vanity. Also What then to do on the rest of the wall(s)? Just painted gib? If I used T& G or groove panelling I would want it to reach the ceiling. So do I put T&G on on all walls? The vanity wall has approx 1000mm 'strips' of full wall either side and the strips below the vanity and above mirror if only a splashback is incorporated. The opposite wall is almost taken up by window, radiator below, btw toilet and towel rail, leaving little wall to 'feature' and then the remaining wall is narrow (only 1100 left after door). These remaining walls could just be left as painted gib of course as really cannot afford to take the 'marble' panelling anywhere else in the room nor think where else it would feature best. 'Marble' Flooring is a possibility but it would need to be vinyl not porcelain tiles. Having written all this down I think I have talked myself out of T&G on any of the walls as the narrow room would become too busy and bitty but am still interested in what others think.