The floor and cabinets almost look like the same color. I would lighten the cabinet color - making sure it doesn't clash with the floor color. I would also modernize the open cabinet above the microwave by removing the moulding, or adding a door. I'd find an inexpensive countertop that pops against the wood (or painted) wood cabinets. Change out the cabinet glass to clear, and do a new backsplash that brings it all together. And, finally add a cool light fixture, and maybe a kitchen rug.

Hello Marcelle, I am an interior designer . I can tell you a simple inexpensive way to change the look of your kitchen. Looking at the photo you sent the different cabinet heights , and all the objects on the stove wall are very busy . Your modern house is wanting a cleaner , simple look. I would lower the small cabinets so that the top is at the same height as the others in the room. And put doors on , that will hide the clutter. Next I would do a tile backsplash above the stove , up to the same height. The whole kitchen will be pulled together by the continuous top line. There is a small light wood cabinet with baskets in the foreground . I would paint it white , or the same dark accent color of the cabinets you have. I don't think you would need to change the beams then , they would add interest and drama once everything else was subdued. Lisa

Hi everyone, we have moved in! We didn't manage to paint before we moved and think we will go for a staged approach - above the wood panels first in a warm white then decide on the panels. I'm having a bit of trouble working out what kind of sofa to buy and how at arrange the lounge. All furniture except coffee table temporary in photos and would love some ideas!

~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.