What a fantastic architecture. When you do the brick, if you stain it with masonry /concrete stain you won't have the same issues of maintenance as with paint. They will spray it evenly - through you will have to select a deeper color - either taupe (brown-gray) or a straight charcoal. Love your windows and the classic angled railing. I think a dark gray on the siding will make the orange brick jump even more. What bothers me is the white (railing, fascia, eaves) juxtaposed with the earth toned stuff. So I would recommend camel tones - for the siding - something like http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6108-latte/ and the hopsack next darker tone for the garage door. Use the lighter tan for trim that is now white - http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6107-nomadic-desert/ Use the darkest tone if you are painting concrete steps. If you think you will stain your brick charcoal, then the white eaves and trim are probably right, and you may not want to paint it tan now and then go back. If your brick were charcoal, then I would block out the rest in grays and blue grays - leave the white eaves, but take the railing and posts charcoal too. A blue gray door - like sw smoky blue.

This just popped up , but I see it is quite old . Did you decide on paint colours ? The roof looks almost a brown tone in the photos , but you say it is dark grey . I assume you don't want to paint that ? If you do , go more charcoal IMO . If you don't , I'm assumimg it will look several shades darker with your wall colour choices . There is a roller door on the garage that appears to be a nice shade of orangey yellow . Personally , I would go with your colour choices , but do all the doors ( roller doors , wooden doors ) and gutterings in that ochre shade . Your terrace I would do in a charcoal , but with the top rail either in the orangey yellow , or a really crisp white . I know that sounds a bit 70's ( although they would have added a lot of ranch brown back then haha ! ) but against the light grey I suspect it would work together well , and look the part .

I would look at colour samples next to actual sample of the schist to be used. Take that to a local paint/render shop and look at them together. Looking at your image, the schist looks to be a golden schist rather than a grey. Is this just the way it has been shown? I would check with the suppliers for the actual colour of stone to be used as there are a lot of possibilities and the colour will affect your colour choice for the plaster. Here are a few websites showing some schist colours: https://www.worldofstone.co.nz/stone-mason/stone-masonry/schist https://wanakastone.co.nz/style/ Also consider the visibility of your mortar and its colour. Keep in mind that depending on your render system, you may be even more restricted in LRV, as some systems require an LRV of no less than 40%.

Looking for a shade of white to compliment the exterior cladding on our new house - don't want a shade of white that is too bright - something that will look good with "matt charcoal"