We just stained our section fences with Wattle Ebony from Mitre 10. Was looking for a charcoal color too, not much flexibility in color options with stains from the shelves at store. We sprayed on, rather than brushing. Is cost a concern? One of our to be neighbours was doing there fences at the same time with paint, he said he used nearly 100L of paint for 2 coats, we used nearly 50L in 2 costs - had similar amount of fences. I've included photo of it after the 2 coats

Without knowing any more info , I'd say its near impossible for anyone but you to know what colour/s to choose -- do you want the house to blend in but have its own style , or do you want it to stand out ? What colours are your main furniture items and even kitchen etc ? For xxample , if keeping the beige walls , how about doing the eves and gutters and garage door in a tangy ( bright , but not glaring ) orange -- this would work with the existing colours and not require a complete repaint . BUT if your kitchen was mainly various shades of , say , green and teal , and your lounge suite and duvet covers were mainly blue hues , that may 'feel' funny , clashing with the exterior ? Of course , blue and beige exterior may not work with the brown aluminium , as youve recognised . Another option ( a bit hard to tell from the pictures ) is that a light grey ( repaint the beige ) with mid-charcoal base boards may work with the brown aluminium , then a bright colour on the gutters and front and rear doors to suit -- anything from sea blue to bright yellow , orange , red , even white or off-white would probably work .

Hey there. Go for a cooler colour palette and draw the eye to a focal point at the end of the hallway, a console table, artwork, a mirror etc. A cooler paint colour helps the small space visually recede. In terms of the doors, going slighter darker will again make the space feel bigger. Go half a shade lighter on the low ceiling than the walls, using the same colour, rather than bright white, which will look dirty in the low light. Good luck!

There is a lot of paste and size residue still on the walls. Washing and scraping helps but it still feels like it's there. Would a good sanding be sufficent or do I need to wash all the paste off before painting?