Because the manufacturers these days want you to repurchase they use bottom of the line powder coating which is on your black taps. doesnt matter how good the construction is underneath the black coating it will rust within 3 - 12 months. the black they use is a industrial black which holds moisture (yes it is the same family of blacks on your bullbars that are on the front of your 4wd) this is designed to look good in the showroom but break down over months. Custom powder coating when done properly and with the highest materials on the market which not many use is the best cosmetic coating in the world in my opinion. it will outlast all anodizing and chrome but not raw materials like gold, silver etc etc. regards Bling Custom Coatings and soon to be Bling Home Decor.

Polished chrome is classic, low maintenance and less expensive than nickel. If fingerprints, watermarks or bath products such as toothpaste get on chrome, they are easily removable with soap and water without leaving stains. On the other hand, nickel requires more rigorous upkeep. For example, here are the Care & Maintenance instructions from Newport Brass (they make Restoration Hardware fixtures) "General instructions for cleaning and caring for your faucets and bathroom fittings. Our faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please do not use any abrasive cleaners, rubbing alcohol, ammonia, detergents, brass or silver polish which will scratch the surface. Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will protect the finish. Brass ProTech, product of Brasstech, Inc., can be used on all types of decorative painted and plated finishes. Simply apply Brass ProTech with a soft cloth and let it dry. Remove by rubbing gently with a soft dry cloth. Brass ProTech does not contain harsh abrasives. We highly recommend using Brass ProTech regularly on items finished in Polished Nickel (15), Satin Nickel (15S), Polished Silver (25) and Satin Silver (25S). Do not allow soap scum or minerals in water to build up on the surface finish of your faucets or bath fittings (including toothpaste). These will gradually wear away the protective coating or finish and diminish the beauty of your products. Living Finishes and Uncoated Finishes 03W, 08W, 25 and 25S are living finishes. 03N is an uncoated finish. Depending on maintenance and use, these finishes will naturally weather and change color. Our warranty does not cover living or uncoated finishes. Finish colors can vary and change in color is unpredictable." I recommend chrome in one of the many classic styles available to complement your carrara bathroom.

Don't use the wall faucet variety, UNLESS you want to purchase a new top for the vanity. Or return the vanity. Pretty simple. The round hole was meant to have a faucet. Not a "cover" which may also allow water down under, which may also ruin the vanity as there will be no containing water lines beneath the little hole. Bad idea,

We have that exact sink! And a very small powder room stuck in the 80s. Only difference is our door is on a side wall, and there is no window. We're no where near finished, but just ripping down the pink floral and stripey wall paper has made a huge difference (including revealing the toilet is in fact white, not pale pink). We're going to replace the rather unappealing plastic sink with a tiny ceramic one with new taps, and the old plastic cistern with a new colonial style ceramic one, and new seat (keeping the toilet base as it is in good condition, and classic style). Then new paint, and a good clean and regrout to the floor, new light shade, toilet roll holder, storage in one corner and art.