Thank you everyone for your comments. We live outside Christchurch, and the house was badly damaged in the quakes here. The post-quake rebuild process could safely be described as slightly chaotic, and the house company I am using are located some distance away (like on the North Island), which is why discussion with the architect has been - em - less than optimal. The architect threw something at me to get me out of my comfort zone I think and this is what's freaking me out! I think the windows on the east side are to come (no reason for them not being there), and probably a skylight in the kitchen roof. The section of land is narrow and steep, (this is a historic port town and with access from the south (where the view is); there is no parking other than on the street (south). Patricia - the laundry doesn't sit right with me either! Looks a bit like it's been glued on the side of the hosue. And it is too small as it is to store coats, shoes etc. This is the access to the back garden - thus the door (also means muddy boots can be dumped when we come in!). Entering a house through a living room is very common over here, especially where space is at a premium (small section, small house footprint).

I think your layout is generally good. With a one bedroom it's nice for guests to have access to the ensuite without having to walk through the bedroom. One thing I do notice though is that there is a lot of hallway/storage/circulation space in the center of the building (in the two bedroom portion) that might be better used as living space. You could pretty easily make the ensuite in the one bedroom larger for example. The wash house space seems unnecessarily large to me as well. You could push the wall dividing kitchen from wash house almost all the way back to where the toilet door is in this plan (you'd then have the toilet door open into the wash room to the right from this viewpoint rather than straight ahead). This would leave much more kitchen to porch access, which would be nice.

Hi Gerné - thought I could give you some ideas on how to maximise this kitchen on a low budget. You've added some great photos here to demonstrate the space! From what I can see you have a minimalistic style and lean more towards stainless and monochromatic materials, (love your tap by the way) - There are a number of ways you could add a little more storage and character without spending much.. In the photo there are numbers for reference; 1. I would investigate floating shelves - there are a number of different colours, widths, and lengths to suit the space accordingly. installing these on each side of your splash back would add a bit more storage for your favourite pieces i.e.; vases, baskets, soft accents.. this is more about proving a space to add individuality rather than practical storage. - bare in mind that these need to be installed on load bearing walls - from personal experience they can slant and sag if not completed correctly. 2. This space looks narrow from the photo - you can find a great range of shelving units from Freedom Furniture.. I would recommend a corner unit or a thin & long shelf, I would go with black to retain the scheme here. Kmart has also got some great pieces that I think would fit well into your scheme - check out their Urban Range! 3. Luckily there is storage space up here - I would utilise it for things that aren't used as often that you wouldn't mind getting on a step ladder to retrieve. I have added some photos of above cabinet storage for some inspiration. 4. I would also recommend utilising this space; from the photo this looks nice and wide and would accomodate a free standing shelf well. If you have heard of IKEA I would check out Urban Sales - unfortunately there is no IKEA in NZ - however this is a trusted retailer that supplies products from the store to NZ. Hope this helps! - Also I would recommend investing in additional cabinet space against this wall (5) it would add a huge amount of storage for your family and their needs. I have tried to find the most inexpensive options for you as I am aware of cost. Happy to come at this from another angle if this isn't what you were looking for!

Why did the architect say No ? I wonder if it was load bearing walls or similar -- assuming you aren't altering the window placement , it looks like you are removing 2 internal walls and that stepped in part of the external wall ? If that is the problem , maybe talk to the architect , and an engineer ,and even the council , about compromises -- maybe they will 'let' you remove 1 or both internal walls , and maybe a rejig of the overall design will fit everything ? If the architect says No because he doesn't like the design ( you are the client after all ) and/or wants you to spend more money , change architects ?