Imagine Your Cat Waking Up to This on Christmas Morning...

With its peek-a-boo windows and lofty heights, the Steampunk Cat Transit System would keep your cat purring all year round

Jillian Northrup 16 December 2014

Houzz Contributor. Because We Can is a new kind of Architecture firm: A Design-Build Studio. That's a mash-up of architects, artists, builders, designers, and fabricators. With our own robot-empowered fabrication shop, we make what we design.

Houzz Contributor. Because We Can is a new kind of Architecture firm: A Design-Build... More

Comment148

Click "Embed" to display an article on your own website or blog.

Cats are always looking for something to do. That’s why we developed the Steampunk Cat Transit System (CTS) for a private residence in San Francisco. The homeowners spend a lot of time in their home office, which means their cat is always in there too, and they wanted to offer some entertainment. It allows the feline a means of traversing the room without ever stepping foot on the ground – or computer keyboard – and it looks cool because, well, we think steampunky things look cool. With the right tools and materials, you can make one for your kitty, too. Here’s how.

Because We Can

The first thing you’ll need to do is figure out where your cat transit is going to run. We made this run hug the walls so we could use an easy hook-style support system.

Because We Can

While you are considering the run placement, you should also think about what your cat likes to do. Most cats like to hide, peek out from hiding, jump on top of things and be up high. We designed this system according to those likes.

Because We Can

As you can see in this image, the entry point for the transit system is on top of a steamer trunk that was already in the room. This is easy for the cat to jump onto and then access the entrance to the system.

Because We Can

The run then loops around the room, giving many high vantage points for the cat to peer down from.

Because We Can

A cutout allows hiding and peeking.

Because We Can

The run ends on top of a tall cabinet. Luckily we designed and made the cabinet too, so we were able to add a safety railing around the top of the cabinet to prevent the cat from sliding off if he or she were to fall asleep up there a bit too close to the edge.

The railing is made of aluminium rod, available in most hardware stores. It’s run between brackets.

Because We Can

To create the system, we used Sonotube, which is a cardboard tube with a waxy interior finish used for casting concrete. Sonotube is cheap, readily available at most hardware stores and easily cut with a jigsaw. We cut about one quarter of the Sonotube off to allow the cat to see over the edge and to make it easier to clean inside.

Then we painted the outside of the tubes to make them look like old industrial metal. We used a combination of metallic silver for the base and oil-rubbed-bronze paint on top. You’ll want to use a primer on the tubes before you paint them.

We lined the insides of the tubes with industrial car carpeting, or speaker carpeting, because it is cheap and easy to cut, and it offers some traction for a cat walking along the interiors. We used Gorilla Glue to glue it in place.

Because We Can

After you cut the cardboard tube, you will notice that its structural integrity has been reduced. To beef up the tube again, we needed to add some supporting rings, in addition to hooks to attach it to the wall. We made all the attachment hooks and supporting loops out of plywood. Make a template and cut the pieces with a jigsaw.

Geek Lab: How to Build a Steampunk Cat Transit System

This is our template of the support rings we designed and made for this particular project, cut from 2cm plywood.

Here is our design for the attachment hooks, which were also cut from 2cm plywood.

Geek Lab: Build a Steampunk Cat Transit System

To add a decorative touch, we created these bevel lines from 1.3cm MDF. Two of these pieces sandwich the attachment hooks for a more steampunk look.

Because We Can

After cutting out the support rings, attachment hooks (shown here) and decorative pieces, we primed and painted them to make them look more industrial. If you cannot spray the paint in a spray booth, use a foam roller for a clean, consistent finish.

Attaching the wooden circles and hooks with button-head cap screws and acorn nuts also added to the industrial look.

When screwing something like this to the wall, you want to be sure to anchor it properly or go into the studs. If you cannot find a stud in the right place, try using a toggle anchor for the most versatility and strength. When in doubt, ask someone handier to help you.

Because We Can

In the end you will have a very industrial-looking system and a very happy cat!

Materials:
30-cm-diameter, 120-cm-long Formatube
Speaker carpet
Button-head cap screws
Gorilla Glue
Acorn nuts
Sheet of plywood
Primer
Metallic paint
Metallic spray paint

YOUR SAY
Have you made a cat run at home? Share a photo in the Comments section!

MORE
Pet Ready: So You’re Planning to Get a Cat?
A Humble Home in California Is Transformed Into a Cat Adventure Land
5 Ways to Happily Cohabitate With Your Pets
Pet Talk: A Guide to Dog and Cat Safety in Your Home