Small Exterior Design Ideas with Metal Siding

Miner's refuge
Miner's refuge
Johnston ArchitectsJohnston Architects
The house at sunset photo by Ben Benschnieder
LWH001 (バイクガレージハウス)
LWH001 (バイクガレージハウス)
志田茂建築設計事務所志田茂建築設計事務所
小さなバイクガレージハウス/50m2(15坪)【LWH001】 外壁:ガルバリュウム鋼板波板 1階入口(=窓):木製ガラス引戸
Mike's Hammock
Mike's Hammock
Josh Wynne ConstructionJosh Wynne Construction
I built this on my property for my aging father who has some health issues. Handicap accessibility was a factor in design. His dream has always been to try retire to a cabin in the woods. This is what he got. It is a 1 bedroom, 1 bath with a great room. It is 600 sqft of AC space. The footprint is 40' x 26' overall. The site was the former home of our pig pen. I only had to take 1 tree to make this work and I planted 3 in its place. The axis is set from root ball to root ball. The rear center is aligned with mean sunset and is visible across a wetland. The goal was to make the home feel like it was floating in the palms. The geometry had to simple and I didn't want it feeling heavy on the land so I cantilevered the structure beyond exposed foundation walls. My barn is nearby and it features old 1950's "S" corrugated metal panel walls. I used the same panel profile for my siding. I ran it vertical to math the barn, but also to balance the length of the structure and stretch the high point into the canopy, visually. The wood is all Southern Yellow Pine. This material came from clearing at the Babcock Ranch Development site. I ran it through the structure, end to end and horizontally, to create a seamless feel and to stretch the space. It worked. It feels MUCH bigger than it is. I milled the material to specific sizes in specific areas to create precise alignments. Floor starters align with base. Wall tops adjoin ceiling starters to create the illusion of a seamless board. All light fixtures, HVAC supports, cabinets, switches, outlets, are set specifically to wood joints. The front and rear porch wood has three different milling profiles so the hypotenuse on the ceilings, align with the walls, and yield an aligned deck board below. Yes, I over did it. It is spectacular in its detailing. That's the benefit of small spaces. Concrete counters and IKEA cabinets round out the conversation. For those who could not live in a tiny house, I offer the Tiny-ish House. Photos by Ryan Gamma Staging by iStage Homes Design assistance by Jimmy Thornton
SaltBox Tiny House
SaltBox Tiny House
Extraordinary StructuresExtraordinary Structures
The kitchen window herb box is one of a number of easily attached accessories. The exterior water spigot delivers both hot and cold water from the unit's on-demand water heater. Photo by Kate Russell
MCM Look / Blending Materials
MCM Look / Blending Materials
Princeton Design CollaborativePrinceton Design Collaborative
Detail of front entry canopy pylon. photo by Jeffery Edward Tryon
Saratoga Hill House, Resilient Design, Camano Island WA
Saratoga Hill House, Resilient Design, Camano Island WA
Dan Nelson, Designs Northwest ArchitectsDan Nelson, Designs Northwest Architects
View towards Saratoga Passage and Whidbey Island. Photography by Lucas Henning.
Modern Shipping Container Cabin
Modern Shipping Container Cabin
Tomecek Studio ArchitectureTomecek Studio Architecture
Photography by John Gibbons This project is designed as a family retreat for a client that has been visiting the southern Colorado area for decades. The cabin consists of two bedrooms and two bathrooms – with guest quarters accessed from exterior deck. Project by Studio H:T principal in charge Brad Tomecek (now with Tomecek Studio Architecture). The project is assembled with the structural and weather tight use of shipping containers. The cabin uses one 40’ container and six 20′ containers. The ends will be structurally reinforced and enclosed with additional site built walls and custom fitted high-performance glazing assemblies.

Small Exterior Design Ideas with Metal Siding

1