If you are looking to keep the "period" look, then I say no. My place is from 1916 & had a gross 1980's reno. I ripped out all the ugly vinyl floor & cheap Sears sink & went with a black hex floor, white subway, dark grey grout on both. Toilet & tub were original, but I got an old "Standard" wall mount sink with chrome legs & towel bars & an antique medicine chest, light fixtures & glass shelving & towel bar off Ebay. My total job...about $5k. Help my tile guy is my neighbor, but those 10, 15, 20k bathrooms were out of the question.

Hi Jess, Unfortunately it probably wont stop doing this, as the timber join is butted together that join will always move given the nature of timber. A solution but might not be a cost effective solution would be to router the underneath of the join out with timber and glue in some more timber to help hold the join (a patch kinda thing) this will make the join stronger (assuming this hasn't already been done) Then we only recommend either a oil or wax finish if you want it to be left with a natural look or we apply a clear epoxy resin finish, this is a very good product (about 2-3 mm thick) and it lets the timber move a little and the product moves with the timber rather than crack like the lacquer seems to do. We pretty much always have the same result with kitchen benches when it comes to the sink area and joins. The main cause I see happening is that the timber moves (and it will never stop moving) and then if the lacquer is not flexible it will split open causing a spot for moisture to get in and under the lacquer making it go all funky like that A easier option would be to sand the tops and apply a oil and keep maintaining it, then you will never get the funky cloudy stuff happening, but you will need to do some research on what product are best and available where you are Good luck :-)

Sorry for the delay....well I still haven't quite got to the floor yet. I have friends and family advising that black would show up every bit of dust etc and one friend who had a shiny black floor and felt that she was forever mopping, and if the light shone on the floor on the wrong angle you could see where the mop had been. I think this would frustrate me too much especially with young children and a cat so I think a whitewash look could be a good option, or reclaimed battered timber perhaps.......see why I haven't chosen the floor yet. Lol. You could always go a black but a weathered matt reclaimed timber that could look good too. Good luck!

The roof will be a dark grey/charcoal colour. The gutters are an off white colour, windows are white and we have cream brick all the way around. I am unsure what colour to paint it. I want to keep away from green because my house is surrounded by a sea of green. My husband thinks a light grey along with a new timber front door.