I think it is awesome to give a piece of furniture a new life. It is sometimes a bit daunting to take a paint brush to a piece made from genuine old timber but if you are going to get many more years of life and enjoyment out of it I think it is better than dumping it. I believe it shows your love. jbof4 I started with a heat gun to remove most of the many layers of paint, (some are easier than others to strip this way). Then I used an orbital sander and sanded and sanded and sanded. You might also try liquid paint stripper although I find this very messy. I believe you can also get them professionally stripped. Good luck with the resurrection, go for it what have you got to lose.

Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

Unless buying custom manufactured wood cabinets, you are buying a series of boxes. A 100k euro kitchen installation of an Italian kitchen is one example from my portfolio. Differences are found in the hardware, the door/drawer pulls, weight of doors and exterior finishes. It is about the design, first. In our region, you can knock off 1200-2000 just be sticking with a full depth fridge--but it is design that will make it possible to install full depth and get a counter depth effect. In the Garden Oaks Fine Accommodation residential display suite I needed to prove that a high-end design can be executed for less. Again, it is design that does the trick. The owner of the kitchen above loves the pendants over the breakfast counter. I did not have the heart to reveal the price--$19 each. That owner likes/needs bling so the 14k euro chandeliers (2) in the foyer are a feature. But we get more comments on our pendants--because they are integral to the overall design. Real estate agents have pegged this kitchen at anywhere from 45-75k. It cost under 30k. DYI projects offer the opportunity to take the time that you might not otherwise allow to a designer (hence our need to come equipped with knowledge, contacts and suppliers that augment our services). I recommend drawing from images (Houzz is great for that) to start, then researching suppliers, collecting specs, and developing a document that covers all aspects of the kitchen from lifestyle needs to style to comparisons of product reviews. Whittle it down to an instruction for purchase and installation. Consider challenges such as the dreadful corner cabinet turntable and splurge on solutions that make your design truly functional. You'll appreciate the expense that delivers practical functionality. There are remarkable solutions for the corner cabinet--but my fav is to determine whether that space can become storage (cabinet or drawers) in an adjoining room. When not practical, articulated pull-out stainless shelves are functional--and cool. Undermounted sinks are great for clean-line counters. Well placed recessed lighting (design again) eliminates the need for other fixtures--and allows you free rein to purchase for focal point impact or (my preference) to fit seamlesly into the overall look. Enjoy the journey--have fun!

I'm not sure how easy/cheap professional systems are to install. But it might be easier to look at the IFTTT app which works with "smart things" by samsung and many other samsung products, belkins we-mo, and even fit bit.