Brass faucet question
Victoria
last year
last modified: last year
Featured Answer
Sort by:Oldest
Comments (11)
Patricia Colwell Consulting
last yearLisa
last yearRelated Discussions
Powder coat faucet??? Will it scratch??
Comments (8)Because the manufacturers these days want you to repurchase they use bottom of the line powder coating which is on your black taps. doesnt matter how good the construction is underneath the black coating it will rust within 3 - 12 months. the black they use is a industrial black which holds moisture (yes it is the same family of blacks on your bullbars that are on the front of your 4wd) this is designed to look good in the showroom but break down over months. Custom powder coating when done properly and with the highest materials on the market which not many use is the best cosmetic coating in the world in my opinion. it will outlast all anodizing and chrome but not raw materials like gold, silver etc etc. regards Bling Custom Coatings and soon to be Bling Home Decor....See MoreChrome versus Nickel (burshed or not)
Comments (4)Polished chrome is classic, low maintenance and less expensive than nickel. If fingerprints, watermarks or bath products such as toothpaste get on chrome, they are easily removable with soap and water without leaving stains. On the other hand, nickel requires more rigorous upkeep. For example, here are the Care & Maintenance instructions from Newport Brass (they make Restoration Hardware fixtures) "General instructions for cleaning and caring for your faucets and bathroom fittings. Our faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please do not use any abrasive cleaners, rubbing alcohol, ammonia, detergents, brass or silver polish which will scratch the surface. Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will protect the finish. Brass ProTech, product of Brasstech, Inc., can be used on all types of decorative painted and plated finishes. Simply apply Brass ProTech with a soft cloth and let it dry. Remove by rubbing gently with a soft dry cloth. Brass ProTech does not contain harsh abrasives. We highly recommend using Brass ProTech regularly on items finished in Polished Nickel (15), Satin Nickel (15S), Polished Silver (25) and Satin Silver (25S). Do not allow soap scum or minerals in water to build up on the surface finish of your faucets or bath fittings (including toothpaste). These will gradually wear away the protective coating or finish and diminish the beauty of your products. Living Finishes and Uncoated Finishes 03W, 08W, 25 and 25S are living finishes. 03N is an uncoated finish. Depending on maintenance and use, these finishes will naturally weather and change color. Our warranty does not cover living or uncoated finishes. Finish colors can vary and change in color is unpredictable." I recommend chrome in one of the many classic styles available to complement your carrara bathroom....See MoreOutdoor shower in cold climate
Comments (20)An all weather outdoor shower is easily done by locating the mixing valve inside the house and use a coupling shaft to locate the handle on the outside. You must use a standard tub type lower faucet (with the pull up to activate the shower) to allow the system to drain out when the shower is done. You also have to make sure everything slopes in direction of the water flow. We live in Bancroft Ontario so winters are well below freezing and we have been showering outside for 3 winters. Only issue we have is the shower head will freeze so we typically remove it after a shower or shower without it on when really cold. The system has worked well and it helps that nothing special needs to be done by anyone. no inside valves to close etc. Just turn off tap and everything drains....See MoreCountertop conundrums
Comments (36)~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far....See Moreci_lantro
last yearSabrina Alfin Interiors
last yearIluvdark kychns
last yearDesign Directives, LLC
last yearVictoria
11 months ago
Sponsored
oreolucca1