What a fantastic architecture. When you do the brick, if you stain it with masonry /concrete stain you won't have the same issues of maintenance as with paint. They will spray it evenly - through you will have to select a deeper color - either taupe (brown-gray) or a straight charcoal. Love your windows and the classic angled railing. I think a dark gray on the siding will make the orange brick jump even more. What bothers me is the white (railing, fascia, eaves) juxtaposed with the earth toned stuff. So I would recommend camel tones - for the siding - something like http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6108-latte/ and the hopsack next darker tone for the garage door. Use the lighter tan for trim that is now white - http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6107-nomadic-desert/ Use the darkest tone if you are painting concrete steps. If you think you will stain your brick charcoal, then the white eaves and trim are probably right, and you may not want to paint it tan now and then go back. If your brick were charcoal, then I would block out the rest in grays and blue grays - leave the white eaves, but take the railing and posts charcoal too. A blue gray door - like sw smoky blue.

jacquipru: I kind of like it without the lamp. Do you need the lamp there for ambient lighting? If so, then the blue/silver shade for sure. My family would love for me to give advice on other matters. Keeps me out of their hair. HA When you start the other discussion, be sure to include lots of pictures, and include information like "I need to work with all the furniture, except for _________." And what kind of budget you are on. (Champagne vs beer!) You'll get TONS of ideas, but if you aren't working (sorry you are sick) and need cost-effective ideas and products, leaving it open ended might not be as on point and helpful as it could be. It's also helpful to generally indicate your location if you are comfortable. That helps people develop ideas based on what stores/vendors may be available to you. :)

We have black widows rampant... it takes literally inspecting the wood and having a whisk broom handy to de-bug it before putting it in the canvas sling carrier and bringing it in. I've had to go to splitting my wood up a bit thinner to fire my RMH, that has helped too. Neighbor across chunks up and sells firewood, I can get the smaller diameter stuff he can't normally sell very cheaply off him now to fire with; and he has a splitter and has run some of my old 3/4 cord for me. One sling of wood lasts a good 4x of what it used to, so storing inside isn't nearly the issue it used to be.

~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.