~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

Absolutely no problem changing up the carpet. Things to watch for......make the transition in a doorway, an opening or along a visual break in the rooms (like the corners of the walls). I would stay in the same colour range, but just go to the other end of the spectrum rather than change the colour completely.....like light grey going to dark grey, not light grey going to navy blue. You want the separation but an easy transition on the eyes.

squeakerd - it is really hard to get a perspective on the whole area but if this is part of a much larger area then I feel you need to first decide just what you want as the end result. Do you just want your entire area to be one open plan or do you want to break it down into visually defined areas within the open plan. As you have the area now, I don't feel any cohesiveness between your table and the sideboard, I think I would move the sideboard to the end wall, it looks more like it would belong there, even just by the shape of the room. Definitely a larger rug will define the space better - just be careful of any trip hazard with the door nearby - but before you decide on the rug, consider window dressings and whether you want things plain or introduce some bold patterns and what colours look best in the area. Artwork can go where your sideboard is now, but again think colours and impact of design on the whole area. It is all very well to build a room around one piece, but you need to look at the impact that piece will have on other items and what limitations it could cause. I would suggest you set aside some serious time to look through photos on Houzz, especially if you can find areas similar to yours, till you find what appeals to you, put the photos into your ideas book and use that to build your room. I have found this invaluable in the past and it has saved me many an expensive mistake.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)