Excuse my duh-ness but i'm having difficulty trying to follow whats going on here. Are these two photos an exact replica of your house and pool ? If not a hasty sketch with dimensions could help a lot. By kitchen wall do you mean the wall behind the bar ? And where is the pool wall ? Are you considering the covered area as being "inside" ? Sorry for all those questions lol Sometimes when you have a design problem you need to turn it inside out or on it's head. If you can't beat it maybe embrace it by making a feature of it : i.e. contrast by having the lightest colored pool surround and a great blue or tile inside and under the overhang, something that will echo the water color ? If you have a great covered area as in photo you'll most likely be spending a lot of time there and it could be soothing to be able to sometimes retire into a darker inside. In my book, 10M isn't small and also contrasting two floor colors doesn't necessarily make a space seem smaller and confined and may in fact even open it up. Could it be that you've thought yourself into a box here ? Sometimes one needs to give it all a good shake up and see how it resettles.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)

We just stained our section fences with Wattle Ebony from Mitre 10. Was looking for a charcoal color too, not much flexibility in color options with stains from the shelves at store. We sprayed on, rather than brushing. Is cost a concern? One of our to be neighbours was doing there fences at the same time with paint, he said he used nearly 100L of paint for 2 coats, we used nearly 50L in 2 costs - had similar amount of fences. I've included photo of it after the 2 coats

Hi All, We are updating our bathrooms and I need to choose the color of the tiles around the vanity, shower and bath (including wall and bath boxing). One of the bathrooms has dark brown ceramic tiles, timber ceiling and brown timber wainscoting. The other two bathrooms have brown timber floors and neutral colored walls/ceiling. The light in all bathrooms is low to medium. I have chosen white vanity tops, with white basins and chrome taps. Do you think it would be too much white if all the tiles were white? Is there such a thing as too much white? Also what type of tiles are the easiest to install? Thanks