Bronan, if you are over 13 and under 21, then the possibilities are really fun with black wood furniture in a room that could be set up with a ballet barre, or used as a dance practice studio as well as a bedroom! Since the floors are dark, you will need to keep the walls light, Usually in a bedroom you start with the colors in your bedding. If you want a new look, perhaps you could start with a pretty floral like this, paint the wall where you will put the head of your bed a deep coral pink to match the bedding and all the other walls a pale pretty coral too. room a soft, soft pink, and hang soft pink drapery panels http://www.target.com/p/threshold-multi-floral-comforter-set/-/A-14982101#prodSlot=medium_1_13 The coral will pop with your black furniture better / a good one that makes your skin pretty in the light - this one for a headboard wall to test - http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6878-animated-coral/ this one for the other 3 walls . . a white with the same coral undertone - http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6609-touching-white/ If possible, you might hang drapery rods on the mirror wall, so you can hang (with this bedding) white drapery at both the window and on each end of the mirror - it will make it feel a lot softer in the room if you treat it like a window. You can follow watch for on sale drapery until you can get a lot that is the same. Put the rod at the same height over the mirror as it is over the window. You might paint an inspirational quote at the top of the mirror in the dark coral (using a stencil) so that you visually fill the space between the top of the mirror and the top of the window. You could get a sample size of pale green paint the color of the green in the bedding to paint an extra piece of furniture that you need that isn't quite right. A little desk or vanity, or even a round end table or a bench for the foot of your bed. Hope this looks like an interesting option to you. Later, you can go for graphic black and white bedding and put hot coral pillows on it with the same paint job and curtains and get a whole new look with just new bedding.

Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

This is why it's always good to have a pro to hold your hand for at least some of the way, (carefully chosen though, check out his/her finished projects, the more varied the styles, the better she/he will be able to understand and adapt to your desires), they can provide the invaluable visual supports too. When it's your own house it's notoriously difficult to see the possibilities, you have it under your eyes the whole time and the defaults shout at you and prevent you being able to see it objectively and envisage the possibilities. you're emotionally involved and emotions always have the upper hand on the brain, so you just keep turning round in circles. Something akin as to why a psy must never attempt therapy on a member of his own family, if you follow me :D As for the façade color, are you sure it needs changing that much ? Once those thick white frames have gone and the new windows nestling more discreetly, correctly positioned and re-proportioned, the aspect will change drastically and be far more streamlined and modern. (the devil is in the detail) I'd also strongly suggest that the wood facing just breaks off around the windows, no framing or finishings. Same thing for all the windows, the small ones too. Entrance : Same as for the windows, that outer frame shouldn't be touching the ceiling, you can try taking that off and painting the door another color before deciding to change it and once again the door could do with setting back a little. You could maybe take that doorstep out while you're at it. Also, i don't know what is happening to the right of the door but i see the concrete steps leaing up and feel it would be good to create another level to make it flush with the bottom of the door if structurally possible. This would tie it all in better and you probably wouldn't need any additional definition to your entrance. Anyhow, as i often quote, i'm a firm believer in " Less is More " , and vice versa of course ^^ Question #4 i can't answer as i haven't really understood the problem And #5 i don't think so, but once the other transformations have been taken care of i think you'll find it speaks for itself. Whatever, it's a very exciting project, the bones are great and i'd love to see photos of progression once you get started.

Hi Wafster, We sell Glowstone (Australian trade mark) in Australia and also do some export. Check out details in our website www.nite-glo.com . In the right application, glow in the dark (photoluminescent, charged by sunlight or lights with reasonable uv content) can look and work fantastically. In other situations, a customer may have unreasonable expectations of the performance of the product and can be disappointed. Looking at the photos displayed recently on Houzz, they will definitely have been taken immediately after the glow products have been charged, and look their brightest. Also modern digital cameras enable low levels of light to be picked up, and corresponding photos may look quite a bit brighter than actual observation by eye. In the photos, one has to say WOW, but taken into a home, perhaps not fully charged, with some delay before viewing, maybe with the eyes not adjusted for night time vision, the result may not be as spectacular. Quite a few of our customers are concreters around Australia who use Glowstone for embedding into driveways, paths, around pools etc. If you would like more information or wish place an order, get in touch with me at info@nite-glo.com Charles Hrubos