Yes, measurements would help. Thank you aldrea1 for other explanation, though. That helps too. It sounds like you are going into a total gut-job! I love this! Great opportunity for your creativity. Also, it looks like you have a petite sized stove. With total remodel you can upgrade to a standard size range. Is this part of your plan? Are you going to replace any appliances? It would be good for you to keep sink and stove in original locations. It is complicated to move the stove's exhaust fan and the sink's plumbing. Not impossible, but probably $$$$$$$ and a lot of hassle…. So, I would start planning with those items--stove and sink on current walls. Wherever you put your refrigerator, it would be best to be sure side view is hidden. If refrigerator stays in current position, you could make peninsula a little smaller, so wall on the right of kitchen entrance could extend further and hide refrigerator edge----Or, move refrigerator to another location… Not too far from sink and counters, though. That would cause you inconvenience. You want a work triangle with not that many steps in-between. Do you currently have a dishwasher? Or are you planning to add one? Not much creativity in placement of a dishwasher---needs to be near water source and drain.. Are you doing the work yourselves or hiring a contractor?

I love all your ideas....bu as we currently have a new + good bin in there already, i don't want to spend another $100+ on another..and this is only a temporary solution...for the nxt few years..as the kitchen won't last much longer. I already have my 'kitchen' cleaning products under my sink..which is unfortunately a separate cupboard to my bin. We couldn't fit the bin under the sink! Prob not much point me taking the cleaning stuff out of my laundry to put in the bin cupboard!! I think i might put some plywood up beside the bin to keep one side of the cupboard separate! That way i have at least 1/2 cupboard of useful space!!

There is the "refacing" option. If the design and placement are acceptable (and they must be since you are wanting to paint) then why not consider new doors and drawer fronts in any style you choose. This is done by a refacing professional for much less money, time, disruption to life than tearing out and starting anew and yet gives an entirely updated look. I have not had this done, but only know someone who did. And she was very pleased.

Possible suggestions if sticking to same floor plan and hands firmly glued to the budget Leave the stove where it is. Down the side of the stove securely attach slimline fireproof panelling to the height of the oven's back control panel and the depth of the oven. Floor to ceiling if you prefer then if you wanted to you could change out the door itself, that is put the door handle to the right of the door so it swings back flush with the fireproof panelling. Put the dishwasher under the stainless steel bench top left of the sink. Take all the cabinetry out where the dishwasher is currently housed place the fridge in the centre of that wall building functional cabinetry around it. Get rid of the cupboard at the end of the stainless steel bench replace it with a wheeled butchers block the same width and depth of bench also have hinged sides so you can get extra useable bench top surfacing. You could then wheel it around include brakes on it of course so little hands don't go racing around with it.