When installing over top of old ceramic/porcelain be aware that you will most likely have to "sink" the old tiles in cement to do this. That means grinding down the tiles a little (rough up the surface) then the self leveling cement is poured and allowed to dry. The new floor is then laid over top. Vinyl is notorious for requiring EXTREMELY flat surface. A ceramic tile rarely has this requirement (grout lines and "high spots" around tile corners give problems). A glue in place tile is also going to have the same problems and the same solution = sinking the tiles in cement. This adds extra costs to the floor. A rigid floor like a cork floating floor can handle a bit more floor deflection than vinyl or laminate planks. If labour in your area is relatively cheap...you could probably have the tile removed and the sanding of the mortar done for the same price as coating in concrete. You will also have the luxury of being able to lay any floor you want once it is done AND you don't have to worry about increasing the floor height. It is possible to sink the ceramic in cement...but is it the most cost effective option? Maybe not.

Flooring should be light. I'm not sure how a bamboo floor would work. Did you end up going ahead with the kitchen plans? What did you go with?

The all black kitchen looks scary as. Maybe because there's no lightness in there at all.

I am renovating the kitchen/diner/lounge in my apartment. I chose engineered oak flooring, plus a thick underlay with excellent soundproofing properties. Measuring up today with the kitchen company and the flooring company, there was a hearty debate about whether to 1) lay the flooring first and kitchen cabinetry after, or 2) cabinetry installed first, and the flooring around it. I would very much appreciate any advice on this matter. Thanks in advance.