Blue gray window frames match the funky roof. The cedar is diametrically opposite on the color wheel as a orange tone. Usually the browner grays (sort of the light shade now on the stucco) do better with cedar to say modern, but since you have the blue gray, allow me to suggest that you just go as dark gray as you can - nearly charcoal on all the weatherboard. If you are in a high heat area (palms might or might not be - that might be the ocean on the horizon which might me an onshore breeze all the time) then you want a white. Not a blue-white but a warm white - bm maritime white is a good choice. With the cedar and the two blue-blue-gray elements, you need neutral without tone.

You have "wear through" which is when the finish is pierced and the wood is exposed to the elements. The dark areas are where dirk/water/mud have stained the floor. It is possible to get this out... but probably not all the way. A floor that has wear through needs to be sanded right down, stained (if you wish) and then refinished. Patching can occur...but it is almost always a waste of time because the "look" can be very different from the original sitting right next to it. I don't recommend it for your situation. The second photo shows the deep scratching. Ideally, you would have had your floors looked after BEFORE wear-through occurs. There are some "regular" scratches to the Left in photo 2. You can see it is visible...but no discolouration....THAT is where you draw the line. The darker "wear through" to the Right in photo 2 = too late = full sand and refinish. If you catch it BEFORE wear-through, you can do a "buff and coat". This is a light sanding with a few coats of high end finish over top. The buff and coat is roughly half the price (in Canada at least) as a full sand/refinish. For this reason it is important to catch the floors before you get to this level of scratching.. That being said, you now get to pick some stains (test patch, test patch, test patch). The first photo shows two different woods...you could ask to see if the lighter would could be matched to the darker wood (lots of testing to achieve this). It won't be pefect...but then again you wouldn't have used reclaimed building materials if you were after "perfect". The match can lessen the colour variation to a more manageable (design wise) level. As for "good for dogs" - natural colour of wood = best colour for scratches. A lower gloss (like a satin) can help. You can ask for the "best" finish with scratch resistance that comes in a can. You will pay a premium for it...but it could/should save you thousands of dollars over the long run. A highend, scratch resistant finish means you can get away with the cheaper buff and coats (every 7-12 years...or so) and be able to retain the original (expensive) finish for the full 25 years. The other thing to note: dogs claws require trimming 2-4 PER MONTH when working with hardwoods. This is what the hardwood flooring refers to as "routine" trimming. Some of my clients thought "2-3 PER YEAR" was "routine". I laughed. You have heavy, high energy, powerful dogs. A single lab can cause some damage over time. Two labs can do a number on a floor. Three labs and you have a very short lived hardwood finish. You have 7. I would find the most expensive, scratch resistant finish available in Australia. I would have the maximum amount of finished put your floors (you will pay extra) it and I would budget for a "buff and coat" every 5-7 years.

Thanks for the suggestions. I will definitely try to attach rounded tiles where I can to make it more Spanish. Also love the idea of attaching Spanish style tiles to fronts of steps etc. I will definitely do bright contrasting front door, and I really like the window flowers idea to break up all the walls. Landscaping is my strength, so got that sorted, and will begin that first. There is too much focus currently on parking spaces, and not enough on outdoor living. What do you guys think of this colour. I am happy to paint over the aluminium windows with whatever colour would suit best. Thanks very much.

New house build.I need a idea for colour matching trim colour on my house. Out side is corrogated iron walls ánd roof in greyfriars,300mm square posts,front and back are in black,inside is spanish white,trim,walls and ceiling in semi gloss. What I am looking for is a colour for the barge boards,front and rear only,rear wood door surround,internal doors (only two,bedroom and bathroom). Was thinking a gutsy orange? Awaiting your views/thoughts