~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

Excuse my duh-ness but i'm having difficulty trying to follow whats going on here. Are these two photos an exact replica of your house and pool ? If not a hasty sketch with dimensions could help a lot. By kitchen wall do you mean the wall behind the bar ? And where is the pool wall ? Are you considering the covered area as being "inside" ? Sorry for all those questions lol Sometimes when you have a design problem you need to turn it inside out or on it's head. If you can't beat it maybe embrace it by making a feature of it : i.e. contrast by having the lightest colored pool surround and a great blue or tile inside and under the overhang, something that will echo the water color ? If you have a great covered area as in photo you'll most likely be spending a lot of time there and it could be soothing to be able to sometimes retire into a darker inside. In my book, 10M isn't small and also contrasting two floor colors doesn't necessarily make a space seem smaller and confined and may in fact even open it up. Could it be that you've thought yourself into a box here ? Sometimes one needs to give it all a good shake up and see how it resettles.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)

Your layout for you kitchen looks really good and would fit well with the mixture of black and white cabinetry. With the lament bench top, we would suggest melamine (entry level cabinetry) or acrylic bench top, which can come in high gloss feature or matt. The matt surface would go lovely with your choice of bench top, and acrylic is also a affordable cabinetry material. Below are some examples of how Reno4u has incorporated both black and white cabinetry together, without making it to dominantly dark. We feel as if these examples would be perfect for your layout, and depending on if you want more black cabinetry or white you can go either way. This design above is an example with more black than white, can be made matt or gloss with different handles/splash back and wallpaper. With a u shaped kitchen similar to yours, however from the pictures you provided your style may include different design below the island bench. Another kitchen designed by us which shows more white than black, with a bar built in which may suit your design better. We hope this helps you, please feel free to call us on 03 423 9067 and we can provide a free quote for materials and kitchen design, and help you finalise your design further. :)