As chookchook said in her recommendation about painting, put a drop cloth on the floor. Get a very safe ladder. remove the lightbulbs, and cover the outlets. Turn off the electricity to the chandelier. Then spray it with a mild cleaner (I use one I found at Target that's basically water with vinegar, until it's dripping wet. Start at the bottom and work your way up, so you don't have dirty spray dripping on the bottom of the chandelier.Work your way up and down until the dripping spray is clean. The chandelier may be gorgeous and expensive, but it seems totally out of place in the architecture of the room--more at home in a chalet than a sunny room with a window wall. I would probably try to find a way to get it removed, and sell it to someone who appreciated it better than I.

Yes, measurements would help. Thank you aldrea1 for other explanation, though. That helps too. It sounds like you are going into a total gut-job! I love this! Great opportunity for your creativity. Also, it looks like you have a petite sized stove. With total remodel you can upgrade to a standard size range. Is this part of your plan? Are you going to replace any appliances? It would be good for you to keep sink and stove in original locations. It is complicated to move the stove's exhaust fan and the sink's plumbing. Not impossible, but probably $$$$$$$ and a lot of hassle…. So, I would start planning with those items--stove and sink on current walls. Wherever you put your refrigerator, it would be best to be sure side view is hidden. If refrigerator stays in current position, you could make peninsula a little smaller, so wall on the right of kitchen entrance could extend further and hide refrigerator edge----Or, move refrigerator to another location… Not too far from sink and counters, though. That would cause you inconvenience. You want a work triangle with not that many steps in-between. Do you currently have a dishwasher? Or are you planning to add one? Not much creativity in placement of a dishwasher---needs to be near water source and drain.. Are you doing the work yourselves or hiring a contractor?

Love the blue carpet. It's such a nice colour and you rarely see blue carpet!

At the end of 2019 I put the finishing touches to a kitchen that was many months in the design and build process. Client Brief: My client, originally from Scotland had always dreamed of having a country kitchen with lots of detail, warmth and charm. The name Charles Rennie Mackintosh was thrown around a couple of times which certainly put the pressure on me, the clients expectations were clearly set very high but also gave me a very clear visual of the style she liked. Before: With space at a premium and two entrances in to the kitchen it was always going to be hard to change the layout of the appliances and fortunately working within this space will always be functional for that reason. After: This kitchen was all about the detail, and how to maximize the impact without taking up and loosing too much space. The pantry, which is opposite the hallway entrance had always been a square eye sore. I told my client I wanted to make it look more like a piece of furniture and vary the depth to take away from its heaviness. By having tall elegant bi-folding doors and lead light windows at the top it was definitely a Mackintosh inspired look from his amazing chairs. No sacrificing on function though as we made sure the top part of the unit was deep enough for all my clients requirements and easy to access drawers under bench height. With the main area of the kitchen I managed to get some symmetry around the oven using a blind corner to the right and drawers to the left for access and function. For simplicity of the visual I manufactured the drawers to the left of the oven with the same molding as a door, I then put them on push-to-open runners and offset the door knob to finish the balance. A beautiful hand made butler sink was sourced to give some authenticity to the space and a modern integrated dishwasher allowed us to not have too many things fighting for the limelight. depth and character we given to the design with my hand finished details from the shaped toe kicks and fluted column panels, up to the Flemish glass lead light windows and shaped cornice molding. I am very fortunate to have a fantastic stone fabricator that I work with, who fully embraced my requirements for detail. He manufactured the bench with no joins in the corners just behind the hob and sink really completing this amazing transformation. As with any renovation, the final judgement comes down to how the client reacts and feels towards their new space.. and by her reviews I know this is one very happy customer! If you would like to know more about this, any of my other projects or would like some advice on your own kitchen projects please feel free to contact me. Jack Bradbrook for Interior Fittings (NZ)