I agree with Diane's ideas! Grey is a nice color. The only thought I had on having a corner sink cabinet, you may not be happy with it in the end. You have a little corner, and the sink may be too small for you in the end along with not having any storage space. If you can't find any curtains that you love, try a cheap roller blind for now. It will give you a visual look and an idea if you want to stay with a curtain or going a bit modern with a patterned blind or even a roman type shade. It could turn the cozy look into a clean modern look. Framed mirrors are expensive. Call a glass company in your area and have them give you a price on mirrors. It might be quite nice to take the mirror down, and replace the wall there with a complete wall mirror to fit, stopping the mirror at the vanity, and continuing the mirror across the vanity between the sink and window. It will make your bathroom feel much bigger, even though you wont be able to see in the mirror over the sink. Close up the vanity doors with new door. Use props first (white poster to cover up the doors) etc. before you buy anything! Stick on tiles are a great idea! They clean nicely and look great. Although I wouldn't go with the wood look. Your bathtub tiles are old fashioned, go with a stick on floor tile that is easy to look at, try to get samples first. Remember Gray is a sleek clean modern color. It is not a cozy country color. If you don't like the grey in the end, maybe a real pale blue or butter yellow (that would be more of the cozy cottage look).

The mosaics behind the vanity are called extra light diamond from Rex. I have added the website http://www.rex-cerart.it/en/extra-light/ The tiler will screed the wall in white so no other colour comes through and then use an adhesive in white and then grout. I have sealed the grout also as white grout can discolour. You will see on the website some amazing applications of this little glass mosaic. Happy hunting

Hope post shows, got some weird error message

I love the look of Tand G as the real thing or the 'James Hardie' NZ groove panels..........but also want my ensuite to look opulent. I am not having tiling anywhere in this room, which would be the easiest solution. Hence my dilemma..... I already have chosen the white 'tile look' acrylic walls with a feature 'marble' (narrow) panel in the shower alcove enclosure from the 'Atlantis' range. The alcove covers the complete width of the bathroom so is a feature in itself. I wanted to bring the 'marble 'feature' into the room if I could to enhance the opulence. The marbling is minimal veining on a white background so not too dramatic a feature. The obvious area is to use a matching 'marble' vanity top and/or a splash back (especially if have a china vanity top, which is the more likely due to cost). Where should the splashback end at the sides? I thought about taking the 'marble' splashback above the mirror to the ceiling thus creating a similar panel feature to that in the shower albeit wider but don't know how much wider it should be than the vanity. Also What then to do on the rest of the wall(s)? Just painted gib? If I used T& G or groove panelling I would want it to reach the ceiling. So do I put T&G on on all walls? The vanity wall has approx 1000mm 'strips' of full wall either side and the strips below the vanity and above mirror if only a splashback is incorporated. The opposite wall is almost taken up by window, radiator below, btw toilet and towel rail, leaving little wall to 'feature' and then the remaining wall is narrow (only 1100 left after door). These remaining walls could just be left as painted gib of course as really cannot afford to take the 'marble' panelling anywhere else in the room nor think where else it would feature best. 'Marble' Flooring is a possibility but it would need to be vinyl not porcelain tiles. Having written all this down I think I have talked myself out of T&G on any of the walls as the narrow room would become too busy and bitty but am still interested in what others think.