I would suggest you take out the cabinet that is to the right of the stove and use it elsewhere in the house -- perhaps in the bathroom or dining room with a hutch above it. Then, I would suggest you have someone install a lazy susan cabinet in the corner between the sink counter and the stove, meaning you would move the stove down a bit and have a small cabinet/counter top to the right of the stove. I would suggest you have the cabinets refinished in white and then paint the walls a pastel you like. If you would prefer white walls, then add white-painted crown molding and paint the ceiling a light neutral blue, such as Sherwin Williams Niagara Falls Blue. Then, I would suggest you choose a favorite accent color and use this sparingly in accessories like towels, pot holders, small vases or floral arrangements, and a valence above the triple windows. For a genuine 1940s look, you might have white ceramic square tiles with a rectangular red border installed as a back splash behind and above the stove. If you are replacing counter tops, I would suggest a light color such as white with a beige or light grey vein or striation for some sort of pattern. You might be able to find the same color and design in floor tile OR opt for a wood floor as another poster suggested.

Thanks :) All very good points. We thought about having the cabinet doors put in for the fridge but we personally haven't found them to be too practical in the past. Ones we've used haven't seemed to seal so well. We are also planning to upgrade the fridge in the next couple if years. Good thinking about placement of the microwave too. We have a power pack range built into the wall cabinets so unfortunately we can't put the microwave above the cooktop. I like the idea of the appliance cupboard being turned into a corner cupboard, although I'm unsure if that would mean that you then couldn't easily access it from the other side of the bench..? I'm hoping our kids will sit at the breakfast bar and make their own toast etc while keeping out of the kitchen itself.... I also wonder if we should have the wall cabinets all in the same line or if we could drop the usable ones, on either side of the power pack, down further to give us more storage....? And (I promise this is my last dilemma!) does anyone have any ideas on whether to place the 1/4 sink to the left or the right of the main sink? Again it's one of those things that I'm going around in circles about....next to the prep area vs next to the dishwasher.....? ...... Ahhhh decisions, decisions ;-) Thanks again

I love all your ideas....bu as we currently have a new + good bin in there already, i don't want to spend another $100+ on another..and this is only a temporary solution...for the nxt few years..as the kitchen won't last much longer. I already have my 'kitchen' cleaning products under my sink..which is unfortunately a separate cupboard to my bin. We couldn't fit the bin under the sink! Prob not much point me taking the cleaning stuff out of my laundry to put in the bin cupboard!! I think i might put some plywood up beside the bin to keep one side of the cupboard separate! That way i have at least 1/2 cupboard of useful space!!

This is a kitchen going into a dog kennel building so I'm not too worried about resale. My dogs are raw fed and so I spend quite a bit of time prepping food, washing bowls, etc. I'm only 5'6" but I've been doing these tasks in our house... in our current kitchen which has counters at 35 1/2"... and my back is constantly killing me after I get done. I've purchased a long stainless steel counter top for the kennel (with built in sinks) but plan on the cabinets underneath being custom built. Just can't figure out what height. I was wondering... if I'm sitting at a table (which is comfortable for me to work at for hours on end) and I measure where the table top "hits" on my body and then stand and measure the distance to the floor, it's about 41". I'm wondering if that is an indication as to where my counters in the kennel should be! Seems awfully high! I may need to take the counter top I've bought and put it on some saw horses and varying heights and work on it to see what is best before I make the call!