I have just taken a couple more pictures (excuse the untidy house) from the stairs. As you can see it's an open plan area that isn't that big but very high ceilings also in wood (Macrocarpa) with dark wooden beams. The house is surrounded by bush so quite a dark house. I initially considered a darker wood similar to the beams but not sure if that will make the house appear smaller / darker...I'm really not sure what to do!?!?!? Thanks

jacquipru: I kind of like it without the lamp. Do you need the lamp there for ambient lighting? If so, then the blue/silver shade for sure. My family would love for me to give advice on other matters. Keeps me out of their hair. HA When you start the other discussion, be sure to include lots of pictures, and include information like "I need to work with all the furniture, except for _________." And what kind of budget you are on. (Champagne vs beer!) You'll get TONS of ideas, but if you aren't working (sorry you are sick) and need cost-effective ideas and products, leaving it open ended might not be as on point and helpful as it could be. It's also helpful to generally indicate your location if you are comfortable. That helps people develop ideas based on what stores/vendors may be available to you. :)

Hi anne, that's what I was originally thinking, my issue is what colour I use for the 'pop' :) I keep coming back to a teal/turquoise colour (it's one of my favourite colours!!), I love blues, purples, teal/turquoise - many on here have suggested yellow but I'm really not sure about it. Here in New Zealand we're in Autumn, nearing Winter so uncertain about the yellow. I found these cushions that I've fallen in love it, and wondering how I could make these work.. do I try teal and mustard together, as an interior designer suggested?

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)