There are many examples on houzz of contrasting counters for perimeter and island. For example butcher block on island and stone on perimeter or a solid color on one and something with movement on another. I would only mix two stones if one had movement and one was fairly solid. The stainless on perimeter and something else on island sounds good to me. Here is a pic of stainless counters with what looks like a stone breakfast bar. (I hope I understood your question right). http://houzz.com/photos/3137660

I would suggest you take out the cabinet that is to the right of the stove and use it elsewhere in the house -- perhaps in the bathroom or dining room with a hutch above it. Then, I would suggest you have someone install a lazy susan cabinet in the corner between the sink counter and the stove, meaning you would move the stove down a bit and have a small cabinet/counter top to the right of the stove. I would suggest you have the cabinets refinished in white and then paint the walls a pastel you like. If you would prefer white walls, then add white-painted crown molding and paint the ceiling a light neutral blue, such as Sherwin Williams Niagara Falls Blue. Then, I would suggest you choose a favorite accent color and use this sparingly in accessories like towels, pot holders, small vases or floral arrangements, and a valence above the triple windows. For a genuine 1940s look, you might have white ceramic square tiles with a rectangular red border installed as a back splash behind and above the stove. If you are replacing counter tops, I would suggest a light color such as white with a beige or light grey vein or striation for some sort of pattern. You might be able to find the same color and design in floor tile OR opt for a wood floor as another poster suggested.

~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

We are planning a new house, and have chosen a soft grey melamine kitchen with perfectly plain cupboards, and darkish handles with coppery hightlights. The bench-top is a new ceramic tile type of material in a slightly darker grey/concrete color, with coppery highlights through it - very nice. We have discussed having the center island a darker color as this is very visible from the dining room, and thought it would be a nice feature. There will be a copper colored Formica under the servery for a highlight, and the cupboards facing the dining room on each end of the unit will be the darker wood or melamine. The only thing we have been offered to use for the cupboards and each end on the unit is charcoal wood grain finish melamine, but now we are getting cold feet. Has anyone seen this used, and would it look a bit cheap...? Would it cost much more to use a proper wood...? raewyng