I would suggest you take out the cabinet that is to the right of the stove and use it elsewhere in the house -- perhaps in the bathroom or dining room with a hutch above it. Then, I would suggest you have someone install a lazy susan cabinet in the corner between the sink counter and the stove, meaning you would move the stove down a bit and have a small cabinet/counter top to the right of the stove. I would suggest you have the cabinets refinished in white and then paint the walls a pastel you like. If you would prefer white walls, then add white-painted crown molding and paint the ceiling a light neutral blue, such as Sherwin Williams Niagara Falls Blue. Then, I would suggest you choose a favorite accent color and use this sparingly in accessories like towels, pot holders, small vases or floral arrangements, and a valence above the triple windows. For a genuine 1940s look, you might have white ceramic square tiles with a rectangular red border installed as a back splash behind and above the stove. If you are replacing counter tops, I would suggest a light color such as white with a beige or light grey vein or striation for some sort of pattern. You might be able to find the same color and design in floor tile OR opt for a wood floor as another poster suggested.

Hi Zara, me again. If the tiles are all cracking, there probably are air bubbles in the mortar underneath. Taking it all out is the best choice you can make. Like I've said in your other posts, taking only the broken ones out, will take more time and effort than replacing all of it. On top of that, when it's bad underneath, you can just wait for the next tiles to crack. Wish you well.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)

Beauty and practicality; Mmmmmm ..... When it is something that you love .... real wooden floors. Now vinyl just gets dirty , Ply looses it functionality, real wood however gains a patina. You want that. People pay thousands of dollars for that. Go with the most genuine example that you can afford of what you love. Factor in your budget and add to it, an area at a time and be pleased that your life gives character to it every day. By analogy; A mahogany french polished table will just give you a nervous break down every time someone doesn't use a coaster ... a hardwood table can be replenished over and over with hard wearing protective surface .... which you can repair. If you love it, if it adds genuine warmth and character, you won't mind maintenance. You won't be saying ...." look at this floor , isn't it amazing? It looks just like the real thing?"