Having only 4 feet above your face sounds tight to me. Guess you could have a couple of people hold a thin piece of plywood at that height as you lay on the floor. Think I would move the doggie den somewhere else and use a couple of those feet for the sleepers.

This is the carton size: 520 x 340 x 220mm This is the minimum cabinet size - 500 mm The weight is 4kgs Waste fittings include a 90mm basket waste

Hello, I am in the beginning stages of designing (rough design, for someone more professional to finish off), and building a 50m2 single room building. I'm bound to have numerous questions as the process moves along. But for now, I have what I thought would be a simple thing to just look up online, yet it wasn't. There is a 5m height restriction in the area. The site is sloping. I've looked extensively online and couldn't find any useful information on how I determine the building height, when the site is on a slope. The only info I found referred to the height being from the ground level (prior to any earthworks commencing), to the highest point on the building. How is the "ground level" determined on a sloping building site? Also, if we dig some way into the slope, which will effectively lower the visual profile of the building, does this impact from what point we measure the building height? Does anyone know? Thanks very much... Jonathan

My line of thought is remove; shower tray, shower panel/door, make bath frame, add drop in bath, jib/tile around bath frame. can the existing drain be used for the plug and can we just add a tap for th bath? Would just have a shower curtain. Just looking for the simplest way to add a bath to the existing shower set up. Exceptional drawing below: Measurements from left to right: 1780mm width of existing shower: 870mm