Some inspiration, the last pic is clever with the bookcase, you would have a lip on the shelves to stop books falling off every time you open the door, but it sure serves two purposes

I'd shunt the stove and the sink so you have space to work between the sink and the stove, especially. And then I'd put a skinny pull out pantry to the left of the fridge to end that run, not a wall. Lots of storage, and you can get them at 15" width. I wouldn't put anything on the island such as a sink or a cooktop, blech. Much easier to have a plain island.

I grew up with these panel doors and remember the glorious day they were replaced by a curtain. So if you are open to the idea, for ease of use, least effort and cost that's a simple fix that your daughter may want herself. The top cabinet doors can be considered a cornice for the drapes, and can be upholstered, maybe in the same fabric as her window curtains, and a simple drape with coordinating stripe on the bottom. Search "upholstered doors" on Houzz, and you will see ideas for nailhead trim, tufting, etc as well. You may also be able to add thin trim molding in a custom design to make them special. Good luck!

I love the look of Tand G as the real thing or the 'James Hardie' NZ groove panels..........but also want my ensuite to look opulent. I am not having tiling anywhere in this room, which would be the easiest solution. Hence my dilemma..... I already have chosen the white 'tile look' acrylic walls with a feature 'marble' (narrow) panel in the shower alcove enclosure from the 'Atlantis' range. The alcove covers the complete width of the bathroom so is a feature in itself. I wanted to bring the 'marble 'feature' into the room if I could to enhance the opulence. The marbling is minimal veining on a white background so not too dramatic a feature. The obvious area is to use a matching 'marble' vanity top and/or a splash back (especially if have a china vanity top, which is the more likely due to cost). Where should the splashback end at the sides? I thought about taking the 'marble' splashback above the mirror to the ceiling thus creating a similar panel feature to that in the shower albeit wider but don't know how much wider it should be than the vanity. Also What then to do on the rest of the wall(s)? Just painted gib? If I used T& G or groove panelling I would want it to reach the ceiling. So do I put T&G on on all walls? The vanity wall has approx 1000mm 'strips' of full wall either side and the strips below the vanity and above mirror if only a splashback is incorporated. The opposite wall is almost taken up by window, radiator below, btw toilet and towel rail, leaving little wall to 'feature' and then the remaining wall is narrow (only 1100 left after door). These remaining walls could just be left as painted gib of course as really cannot afford to take the 'marble' panelling anywhere else in the room nor think where else it would feature best. 'Marble' Flooring is a possibility but it would need to be vinyl not porcelain tiles. Having written all this down I think I have talked myself out of T&G on any of the walls as the narrow room would become too busy and bitty but am still interested in what others think.