Looks like you have several things to consider in the layout. What the view out the window ? Do you really want to see more of whats outside? Cooking is always best on the outside wall to get it vented, island cooking is a last resort, downdraft dont work well at all and the island hood is typically obstructive. Looks like the wall should come out to open the space up. Best advice is to have a designer come to your home and see it in person. There are costs associated with every change and it is very difficult to judge just from photos.The design phase is the most important part of any kitchen remodel the builder is only going to install it as the plans layout. Find a great designer that makes house calls :)

You have a good nice project planned here, with your kitchen now a part of large living space. Here, though, are some cautions and suggestions. Your extra-large peninisula counter and full window wall over the sink seem to be features that you like and want - but they also cause some problems with this plan. If two people are ever in the kitchen, one will be trapped there. And even for one, the peninsula forces an irritating hike around it to the table for serving and clean-up. Table and array of counter stools are uncomfortably close together, creating congestion especially when occupied. And while your back wall may well contain a fridge, wall ovens, pantry and cook-top, it would just barely do so - and leave no other space at all for counter. This, together with your nice bank of windows on the outside wall leave no space at all for upper cabinet dish storage. I agree with Laurie that an island here would be much preferable. I would put the sink and dishwasher on an island, with fewer stools, and some mid-height dish storage - letting gatherings of more than two or three enjoy the table in a conversational arrangement instead of facing away from the room in a row. I would also minimize the window array a bit, and extend the kitchen toward the dining table window a foot or so - and put the wall ovens at this end of the "L" - with no side wall at the left. This would distribute your countertop space more happily among your work stations, allow for some upper cabinet storage, and make the kitchen feel more part of the nice big room, instead of separated from it by the peninsula. Perhaps a careful in-person visit with a kitchen designer would be wise before you build this fun new addition. Good luck! Mark

Beautiful clean modern kitchen! You have a great opportunity to put your personal stamp on the space with a unique backsplash. As you've heard already there are some different approaches. I'd probably place the backsplash up to the wall cabinets and up to the base of the hood. Then continue the backsplash at the same height (18"?) behind the sink. Then place an inspiring colorful picture above the sink to break up the wall. Here's a picture with pendants that aren't too obtrusive. Having multiple levels of lighting at different lumens makes a more inviting feel to the space. I couldn't decipher your flooring, but you may also want to consider adding some nature elements like a type of wood flooring, wood stools, etc. Good luck! If you need software to plan out materials check out our Home Designer software: http://www.homedesignersoftware.com/

congrats! first, sand prime and paint out those cabinets....i'd go with a grayish shade of white or pale gray that will work with the flooring. i'd also carefuly chip off the yellow tiles. since on a budget, consider applying some beadboard as your backsplash, painted in a glossy, oil based or marine paint in a crisp white to keep it scrubbable, then, dress up the edges with some small mouldings, painted in the same white paint. this is going to be SO MUCH less costly than tile! and it will look great with the butcher block countertop. you can probably refresh the butcher block with a light sand and oiling. you could even get an additional piece of butcher block (ikea) and create a step-up 'bar' for some stools on the peninsula for some casual seating. then get a pair of pendant lights to hang from the pot lights above (they make lights that insert directly into the pot light...no hardwire necessary).