I haven't put engineered oak floors in my home, but I love the oiled look. What did you decide to go with?

after watching my daughter and her husband agonize over the way their expensive timber floor has not held up well after 3 years, I would recommend tiles/wood look tiles with under heating. Their beautiful warm expensive floor looks like it always needs a clean and polish, not from neglect, they have cared for it well. One of the boards now has a slight and painful moan when it's stepped on :-( I grew up in a completely wood floor home and although it looked wonderful, my Mother hated it. ....and the mats ! Wood is a lot harder to maintain than tiles ,(no matter what the die hards say) the modern wood finishes are much better than they used to be.... But a piece of wood is rather arty no matter what it's used for and it does demand to be loved and cared for.....and if something goes wrong it's a lot more expensive to fix than sand and cement. Ultimately you have to be happy. BTW underheating tiles is warmer than timber :-)

Hi Jess, Unfortunately it probably wont stop doing this, as the timber join is butted together that join will always move given the nature of timber. A solution but might not be a cost effective solution would be to router the underneath of the join out with timber and glue in some more timber to help hold the join (a patch kinda thing) this will make the join stronger (assuming this hasn't already been done) Then we only recommend either a oil or wax finish if you want it to be left with a natural look or we apply a clear epoxy resin finish, this is a very good product (about 2-3 mm thick) and it lets the timber move a little and the product moves with the timber rather than crack like the lacquer seems to do. We pretty much always have the same result with kitchen benches when it comes to the sink area and joins. The main cause I see happening is that the timber moves (and it will never stop moving) and then if the lacquer is not flexible it will split open causing a spot for moisture to get in and under the lacquer making it go all funky like that A easier option would be to sand the tops and apply a oil and keep maintaining it, then you will never get the funky cloudy stuff happening, but you will need to do some research on what product are best and available where you are Good luck :-)

Sorry for the delay....well I still haven't quite got to the floor yet. I have friends and family advising that black would show up every bit of dust etc and one friend who had a shiny black floor and felt that she was forever mopping, and if the light shone on the floor on the wrong angle you could see where the mop had been. I think this would frustrate me too much especially with young children and a cat so I think a whitewash look could be a good option, or reclaimed battered timber perhaps.......see why I haven't chosen the floor yet. Lol. You could always go a black but a weathered matt reclaimed timber that could look good too. Good luck!