Mod Podge is the best stuff for decoupaging. That is pretty much what you will be doing except with a much larger piece of paper. If you do this procedure make sure you coat the completed item as well, not just what you would do to make it bond onto the wood or canvas or whatever material you are using. Have fun!

With any post war house built in the 50's the connection from in to out is non existent. Depending on where living rooms are located i would take some of the fantastic windows out and replace them with French doors, or bi folding doors and connect the house to the site. The colour scheme from Karen is perfect to lift the kerb appeal and give it a modern twist. With land costing more than houses these days and the fact that you seem to have quite a big block, after looking at paint colours, opening up the living dining kitchen areas to the outside with a roofed area. Even combining a flat roofed carport which will widen the house to the street making it seem a bigger house, can carry the new look with say an enclosed section for garden equipment, to the opposite side to the house, and if you are lucky enough to have that near the living area it can be used as both car cover and outdoor living. I always think a good landscape architect is worth their weight in gold, to give you a landscape plan, to suit the soil type, your skills level and your preference in planting. Divide up the exterior space to provide outdoor rooms under a tree, paths that lead to some special spot for kids, maybe even a veggie patch with a chock run, and make sure that you use the entire yard, front and back by enclosing part of the front yard in fencing which suits the style of the house, while providing some planting to the street. If allowed a gate structure to blend in with the house, a dedicated pathway with planting each side to the front door, fantastic fencing and consider natural materials like a hand laid stone fence with timber or powder-coated aluminium inserts, to give this house an entry, not sure where the front door is now, so that is not a good look. Gardens always enhance a house, they are never a wasted effort, and if you are not gardeners, make sure the landscape architect knows that and he will be able to select low maintenance plants. All the paint in the world will not give the desired effort that the garden will do to that paint work.

My vote is for the wash but not in bright white and after some selective knot primer in the same tone. You are going to want to selectively primer down about 2/3 of the knots (use a dark white tinted primer), and use a dark white / brown toned off white instead of bright white so the beams still give you dark white on bright - that would be my vote. Consider something like bm stingray tinted primer and wash on the beams. You can add glaze for more working time or put down dropcloths and use water to cut it into a wash. Test it on some other raw wood that has had tannins develop for a few years. Then put it against your white wall - your husband will get the contrast and wood grain but you'll get the quiet palette you were hoping for. They both will have architectural depth and interest.

We are about to lay new carpet and before we do I want to tidy up the exposed beams in our lounge and master bedroom - see pictures below. I understand the vertical round beams are pine and the horizontal is macrocarpa. The vertical beams are in particularly bad shape - lots of pain marks, cracks, nail holes etc. I have been told by a number of builders the process is likely to be very laborious - I have the time but I am a complete novice. I would like to sand both beams back and stain them a matching natural medium toned colour - at the moment the tone of each looks quite different. They don't need to be perfect I just want them to look tidier than they currently are. Can anyone recommend what tools I might use for the vertical and horizontal beams to speed up the process? Any tips on materials, process to follow? And how I might fill in the numerous gaps in the vertical beams?