~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

Depending on functionality, how your island is used, it can be somewhere to showcase a different material, as in a traditional kitchen with a substantial timber top, or if it's a practical prep area, the durability and maintenance is of utmost importance. If it is a highly utilized work area the surface would be best suited to reconstituted stones, which are man made such as Caesarstone, essastone, quarel la etc, as natural stones such as granites and marbles are more porous and require some maintenance and care. Depending on form and style, your options are almost endless. Cntemporary spaces can indulge in stainless steel tops, acrylic solid surface tops that can be any thickness, profile and can actually be repaired without joints. Glass or concrete are more options. So you ask for help on choosing your island bench top, That is dependent on a great many things. Factor in how you would use is surface, and what you can afford, then think about the overall impact these options can provide on the entire space. Eliminate. And collect samples to make your decision. It will probably become the single most used space in the house.

This is where the kitchen is going to be. Where my husband is will be counter top at that height. with a big wide counter top to sit under. on the back wall double door fridge a metre gap. 2 wall ovens then a sliding door where the ladder is. A scullery. Behind my husband to the side of him a sink the cooker then space. Where the big flat plank is on the ground (ish) will be the movable island. you can see a taster of the stone wall which will be on both sides of the entrance hallway, the flooring will look very similar to this http://carpetdiscounters.co.nz/product.aspx?product_id=441 . You may note the steel next to my husband on that side. it also needs to be treated. Thank you very much

I would embrace the element, but I would get rid of the wood chips. I'm thinking back fist sized river rocks. Then I would get a tallish flowering tropical such as hibiscus and add a few ivy plants to grow between the rocks. Additionally, a small water feature might be nice. For me, the bigger problem with the entryway is the door. You have an obviously contemporary home, yet you have a -very- traditional door. I would want a wood door with some sort of art glass element in it. The wood would of course need to be stained to match the existing woodwork. The door will be some big bucks, but it would remain regardless of flooring changes. These two doors are not specific recommendations, but examples of the type of entry door I have in mind. Best wishes!