I love the look of Tand G as the real thing or the 'James Hardie' NZ groove panels..........but also want my ensuite to look opulent. I am not having tiling anywhere in this room, which would be the easiest solution. Hence my dilemma..... I already have chosen the white 'tile look' acrylic walls with a feature 'marble' (narrow) panel in the shower alcove enclosure from the 'Atlantis' range. The alcove covers the complete width of the bathroom so is a feature in itself. I wanted to bring the 'marble 'feature' into the room if I could to enhance the opulence. The marbling is minimal veining on a white background so not too dramatic a feature. The obvious area is to use a matching 'marble' vanity top and/or a splash back (especially if have a china vanity top, which is the more likely due to cost). Where should the splashback end at the sides? I thought about taking the 'marble' splashback above the mirror to the ceiling thus creating a similar panel feature to that in the shower albeit wider but don't know how much wider it should be than the vanity. Also What then to do on the rest of the wall(s)? Just painted gib? If I used T& G or groove panelling I would want it to reach the ceiling. So do I put T&G on on all walls? The vanity wall has approx 1000mm 'strips' of full wall either side and the strips below the vanity and above mirror if only a splashback is incorporated. The opposite wall is almost taken up by window, radiator below, btw toilet and towel rail, leaving little wall to 'feature' and then the remaining wall is narrow (only 1100 left after door). These remaining walls could just be left as painted gib of course as really cannot afford to take the 'marble' panelling anywhere else in the room nor think where else it would feature best. 'Marble' Flooring is a possibility but it would need to be vinyl not porcelain tiles. Having written all this down I think I have talked myself out of T&G on any of the walls as the narrow room would become too busy and bitty but am still interested in what others think.

Photo of the planned area

My line of thought is remove; shower tray, shower panel/door, make bath frame, add drop in bath, jib/tile around bath frame. can the existing drain be used for the plug and can we just add a tap for th bath? Would just have a shower curtain. Just looking for the simplest way to add a bath to the existing shower set up. Exceptional drawing below: Measurements from left to right: 1780mm width of existing shower: 870mm

I had a few companies competing for my business. I went with the guy who was obviously doing his homework, color matching, great price, he found the supplier who had granite from quarry where the counters in my new home came from. Wow is all I can say. When I told the competitor that I was letting her go, she asked why and I gave her the reasons above. She said she'd do it all for the same price. She had done my friend's sister's bathroom and it looked fabulous, I had not actually seen any of his work I saw pictures, but this was an actual project I saw, so I agreed.The project was to put cabinets and a counter top, that matched the ones I had on the other wall.What happened.The got the wrong style, wrong color, wrong size.I decided the color was a shade off... fine... its not that noticeable. The width of the trim of my shaker cabinets were about 2 1/4 inches, her cabinets were 3 inches.She got two 24in cabinets instead of two 36 in cabinets. She brought 2 sliders for my existing cabinets when she needed to bring 4. I was supposed to have 1 large drawer above each cabinet, instead I got 2 smaller ones. The granite was a crappy match. She promised to include 2 outlets above the backsplash. She wanted to charge extra last minute to do one because it was "more complicated than she thought." I had an electrician do it for $40.I feel like I let so much slide. I just wanted it done. I didn't have enough cabinet space. I wanted to finish putting all my things away. My saved spot with the other guy was lost and I'd have to wait until Dec. (It was the 1st week of Oct.) She said it would be 4-5 weeks to complete.Its 12/5. My cabinets are damaged. She splintered the wood when she applied the drawer pulls, she used the wood marker to "fix" bit it still looks crappy. And she wanted the last installment.I told her she can have 1/2 of the last payment, she said she'd come back tomorrow to fix. I was at work on the phone with her. My wife hands her the check, she takes it and says, you know, tomorrow is just not gonna work out. What other day works for you.My wife tells her Monday. She says ok and leaves.I feel like she's never going to be able to fix all. And I have no idea what to do from here.