You can put the TV over the fireplace, not the best situation but the way the room lays out it is the only logical place to put it. If you could you should add one additional layer on your mantel that could extend it out another 4" to deflect the radiant coming from the fireplace. I would also mount it on a slimline mounting bracket and have the bottom of the TV no further than 4" above the mantle. Ideally you want the TV to be in as straight a line as possible with your eyes. You don't want to look up too high at the TV, it's like being at a sports bar. Also if you can snake up the power and the HDMI from the cable there is a box they make that has both in one so it makes for a very clean installation.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)

I like the idea of concrete pavers. What did you end up doing?

Has any one had experience of the pitfalls or success - I would like to know if there's any failures from shrinking or cracking or bowing from expansion? I want to fix directly over a concrete slab thats 10 years old