[houzz=] Here is another that uses the corner well. This also will help offset the lack of symmetry on the range wall as well. Your cabinet maker would need to work out all the measurements. The base drawers to the right of the range may need to be reduced in size to be the same as the ones on the left, which will also help balance the wall. This tall unit to the left of the range will help to balance the large pantry on the right. Where the below picture does not show it, you would have room to place a small matching wall cabinet to the left of the corner tower to balance and to balance out the space between the window. Then you can still have some type of unit to the left of the sink with the appliance garage, but it would not need to be quite as wide and would give some space next to the sink. Look at this more and see what you think. There are some very unique features to your plan. A very high level of customization and much thought has gone into it. It is going to be beautiful. Would love to see the final plan and pictures of the final product. Let me know if you want us to look further.

~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

congrats! first, sand prime and paint out those cabinets....i'd go with a grayish shade of white or pale gray that will work with the flooring. i'd also carefuly chip off the yellow tiles. since on a budget, consider applying some beadboard as your backsplash, painted in a glossy, oil based or marine paint in a crisp white to keep it scrubbable, then, dress up the edges with some small mouldings, painted in the same white paint. this is going to be SO MUCH less costly than tile! and it will look great with the butcher block countertop. you can probably refresh the butcher block with a light sand and oiling. you could even get an additional piece of butcher block (ikea) and create a step-up 'bar' for some stools on the peninsula for some casual seating. then get a pair of pendant lights to hang from the pot lights above (they make lights that insert directly into the pot light...no hardwire necessary).

Not keen on tiles ... prefer a smooth surface with no grout lines to try and keep clean