I would do a glass splash back [ this can be painted in your color choice to suit the decor ] - taking from the bench top up to the bottom of the range-hood on the wall of the stove. The window is beautiful and I would give anything to have them in my kitchen. I would probably paint OR stain and apply marine grade vanish to the would so that any moisture would not be able to ruin the wood. I would also put herbs or flowers there. Could it be made into a servery for outside maybe ???

Thanks for all the great ideas everyone and sorry I didn't explain the polycarbonate a bit better :) This is along the lines of what we'll be using... http://www.psp.co.nz/building-brands/corrugated-sheeting/suntuf-polycarbonate The area is an absolute sun trap and we're hoping to use it as an extension to our living space, especially on rainy days! I've just sent my husband out to get a few pots of different stains for is to try - darkest brown (cedar) and a lighter brown (rustic oak) both by Cabots + the black we already have. Hopefully we can decide between one of those! I probably should have mentioned we will have black aluminium pool fencing running along the top of the second retaining wall - so the real question is do we keep everything black (pool fencing, horizontal fence, retaining walls and pergola) or do we go with a dark (or even light) brown for the pergola and retaining walls.... We just keep going around in circles at the moment. Decisions, decisions! Thanks again :)

You have several choices at different price points. 1- Sheet rock, plaster and paint This is the most expensive option and will add the most permanent value to your home. 2-Wallpaper over a heavy liner paper. 3-Prime then paint the wood, it will give you a stripe effect. Let me know what you decide to do. Linda

My vote is for the wash but not in bright white and after some selective knot primer in the same tone. You are going to want to selectively primer down about 2/3 of the knots (use a dark white tinted primer), and use a dark white / brown toned off white instead of bright white so the beams still give you dark white on bright - that would be my vote. Consider something like bm stingray tinted primer and wash on the beams. You can add glaze for more working time or put down dropcloths and use water to cut it into a wash. Test it on some other raw wood that has had tannins develop for a few years. Then put it against your white wall - your husband will get the contrast and wood grain but you'll get the quiet palette you were hoping for. They both will have architectural depth and interest.