Hi Margaret, Kitchens have a lot of options so it's good to speak to your kitchen specialist about how you use your kitchen as drawer sizes tend to be influenced by type of item you are storing and which zone. DYNAMIC SPACE are Blum's ideas for practical kitchens, you can check out the zone planner, cabinet solutions and tips in our kitchen ideas section of our website. Think about the items you desire to store in your new kitchen in the following 5 zones and this will help you create a brief for your designer: Consumables, non-consumables, cleaning, preparation and cooking. Examples: 450 mm wide is a common width for a bench height rubbish bin solution with SERVO-DRIVE uno 600 mm is great width for a SPACE TOWER pantry 900 mm is a dream cutlery, utensil, plate or pot drawer Click for our NZ Kitchen Designer and Manufacturer Directory. All the best for your new kitchen. Regards, Sophie Blum NZ

I love the look of Tand G as the real thing or the 'James Hardie' NZ groove panels..........but also want my ensuite to look opulent. I am not having tiling anywhere in this room, which would be the easiest solution. Hence my dilemma..... I already have chosen the white 'tile look' acrylic walls with a feature 'marble' (narrow) panel in the shower alcove enclosure from the 'Atlantis' range. The alcove covers the complete width of the bathroom so is a feature in itself. I wanted to bring the 'marble 'feature' into the room if I could to enhance the opulence. The marbling is minimal veining on a white background so not too dramatic a feature. The obvious area is to use a matching 'marble' vanity top and/or a splash back (especially if have a china vanity top, which is the more likely due to cost). Where should the splashback end at the sides? I thought about taking the 'marble' splashback above the mirror to the ceiling thus creating a similar panel feature to that in the shower albeit wider but don't know how much wider it should be than the vanity. Also What then to do on the rest of the wall(s)? Just painted gib? If I used T& G or groove panelling I would want it to reach the ceiling. So do I put T&G on on all walls? The vanity wall has approx 1000mm 'strips' of full wall either side and the strips below the vanity and above mirror if only a splashback is incorporated. The opposite wall is almost taken up by window, radiator below, btw toilet and towel rail, leaving little wall to 'feature' and then the remaining wall is narrow (only 1100 left after door). These remaining walls could just be left as painted gib of course as really cannot afford to take the 'marble' panelling anywhere else in the room nor think where else it would feature best. 'Marble' Flooring is a possibility but it would need to be vinyl not porcelain tiles. Having written all this down I think I have talked myself out of T&G on any of the walls as the narrow room would become too busy and bitty but am still interested in what others think.

Photo of the planned area

I have been going round in circles trying to plan a renovation so would greatly appreciate some advice... Current floor plan: Current layout (contents are sketched and not to scale sorry) Desired outcomes: A more defined 'entrance' area (some people have commented they like it as it is, with the front door opening right into the house, but I would prefer a specific entrance space - be interested in peoples opinions on this) A more spacious main bathroom, with separate shower and bath A space for a home office (ideally with room for two, but that's not essential) An en-suite for third bedroom (ideally toilet, basin and shower; but might not be able to fit shower) EDIT: we really want a nice master bedroom and a nice guest room, hence the desire to add an en-suite to bedroom 3. Even though it is smaller, we have toyed with making Bedroom 3 the master as it's away from the street so is quieter and more private, plus it's not an ideal location for guests being near the laundry and kitchen. And then bedroom 1 would be the guest room. This is where I got to before I decided I needed advice! EDIT: I have updated this floor plan and included some annotations Few other notes: What are the thoughts on Bedroom 1's en-suite being off the wardrobe? Personally, I'm not a fan of it so originally planned to move the en-suite door to be off the bedroom. But this does mean there's three doors on the one wall (middle one into WIR wouldn't need a door - could just leave as an opening like it is now) The door into bedroom 1 used to open into the little passage way, but we have moved this to open into the room - see images below of bedroom 1: Bedroom 1s original layout New door into bedroom 1 (original door used to open in the passage which reduced access width by about 100mm) Potential en-suite door location Front of bedroom, for context (excuse the sander - was the only picture I could find!)