The house looks very livable. I love that you have concentrated on creating one nice bath with separate walk in shower and a windowed tub! Since you have already thought of it, I'm going to assume that the attic is for future expansion and cannot be adapted for use as the current "away room." We are also in the process of designing a small house, and we've designated our study as the "away room." Ours will open off the dining room. If you switched the locations of the Study and Bed 1 on the same side, you could put french doors or an extra wide door with etched or decorative glass from the hallway into the right hand corner of the study. This would give you a really long diagonal view through the lounge and out the french doors, and from the lounge through the study to the window at the far end... The study window should be increased in width to match the neighboring window in Bed 1, and it then becomes ripe for a small window seat, either a clip on bay bumping out, or a "built-in" bay using narrow built ins on either side. Or both: build "in" for now, putting file cabinet drawers under the window seat, and angled corner units in for storage, and add the bump out bay later when you know whether your offspring would prefer a really cute desk, or a window seat, or a bed nook. You would, alas, lose the door from Bed 1 into the bath.... but honestly, there are lot of doors into that bathroom already, and that one has substantial collision potential. It might be best to make the single access point that door from the laundry. Either a glass panel set high in the bath room doors or a transome would make it easy to tell when someone is in the loo. Other ideas would be to split the nook under the stairs, so that half the depth opens to the lounge, and the other half to Bed2... with the wall thickness, you probably get close to 600mm or 2' on each side. Add a deep bookcase or other built in, and you're easily at a depth that makes both spaces very tucked in. Lastly, if funds allow a shallow bay window over the kitchen sink would visually expand the kitchen, particularly if you could arrange it so that the counter runs right into the bay.

Hello, I don't what to say, I'm really surprised by your generosity and how much time you have put in this for me you. Thank you so much. The kids bathroom design is still up in air too. Their rooms will have windows of course ( silly me ). I love what you have done with the family room. I'm not so sure about the master ensuite. We copied it from the Hyatt hotel where we stayed a couple of months ago( they had 2 sinks though), we loved the fact that the whole family kids adults and pets can take a shower bath together. That's why we liked the tub bath combo enclosure. Your comments about the steam and aroma are very valid that's why I think we will need to have 3 extract fans in there. We are currently living in china but we will be done here within a year. Thanks again for your help.

Rather than removing the edging, I would add to its width and this wil make the cabinetry look custom and paint it white. I would also keep the corner shelving and replace your accessories - one item/shelf and related to each other. You could add a great fixture instead of the pot light, change the faucet and hardware. Suggest carrarra marble backsplash (don't put the rack back up behind stove) and there are so many pattern choices. It's also interesting how they have laid the tile in the last picture, which I think would work really well with your set up and will save a bit of money on marble. A dark quartz or granite would be complimentary and warm up all of the white. [houzz=]; [houzz=https://www.houzz.com/photos/6-via-aragon-san-antonio-parade-of-homes-contemporary-kitchen-austin-phvw-vp~1042542];[[houzz=]

How about butcher block instead? IKEA and the big box stores sell it for countertops, the price is decent, and you won't have as many issues with buckling, water damage, or what to do with the edge as you would with the ply. If the edges of the ply get wet, or if any seam around a sink gets wet, the plywood will "blow" and you will have to replace it all, anyway.