I'm quite lucky that we have quite a large bathroom for over here. There all normally so small in older homes! I have a a lot of space to fill and was only going to use the tiles in the bath and on the floor. I find fully tiled bathrooms very very confining. White wall for the rest, apparently, according to the design guru. But it's ok, I've been told when it comes time to decorate the garage I can have whatever I want!!!!

Absolutely no problem changing up the carpet. Things to watch for......make the transition in a doorway, an opening or along a visual break in the rooms (like the corners of the walls). I would stay in the same colour range, but just go to the other end of the spectrum rather than change the colour completely.....like light grey going to dark grey, not light grey going to navy blue. You want the separation but an easy transition on the eyes.

Excuse my duh-ness but i'm having difficulty trying to follow whats going on here. Are these two photos an exact replica of your house and pool ? If not a hasty sketch with dimensions could help a lot. By kitchen wall do you mean the wall behind the bar ? And where is the pool wall ? Are you considering the covered area as being "inside" ? Sorry for all those questions lol Sometimes when you have a design problem you need to turn it inside out or on it's head. If you can't beat it maybe embrace it by making a feature of it : i.e. contrast by having the lightest colored pool surround and a great blue or tile inside and under the overhang, something that will echo the water color ? If you have a great covered area as in photo you'll most likely be spending a lot of time there and it could be soothing to be able to sometimes retire into a darker inside. In my book, 10M isn't small and also contrasting two floor colors doesn't necessarily make a space seem smaller and confined and may in fact even open it up. Could it be that you've thought yourself into a box here ? Sometimes one needs to give it all a good shake up and see how it resettles.

Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor