I agree with you the pillars are unfortunate. The replacement tiles will stand out no matter how close they come to matching so you're better off making sure they are clearly different so the gray one is better. Putting busy mosaic tiles could look nice but will interrupt the flow between rooms which I'm guessing is your problem with the columns in the first place. You will need to create a dextrous solution to tying into the 2x4 wall on the left side but I think it can be done tastefully- maybe beveling it back once you get past he end of that wall.

Hi Zara, me again. If the tiles are all cracking, there probably are air bubbles in the mortar underneath. Taking it all out is the best choice you can make. Like I've said in your other posts, taking only the broken ones out, will take more time and effort than replacing all of it. On top of that, when it's bad underneath, you can just wait for the next tiles to crack. Wish you well.

Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

Thank you. My husband and I chose the tile (per recommendation at the tile store) and used a professional tiler (per recommendation at the tile store) for the install. It isn't a flip. This is a family home that we purchased and spent a year renovating—not DIY but with all professional hired help and a contractor to oversee the job. This tile person wasn't hired by him, though, as he was happy to use the person that we were told was very good by the tile store…. My heart is sinking. I absolutely hate the idea of retiling the shower as there is matching tile on all walls, including shower. I'm hoping there is some other idea out there that will help. I do personally think the tiler should have informed us if the tiles we supplied to him weren't suited to be mitered…we discussed it even before tiles were purchased and he didn't mention any specifications. I'm just worried now that if we put it on him to fix it, we'll end up with a bigger mess...