Shutters sound like they would be a great addition to your new almost at the beach house. Is it an open concept? If so while you can change things up a bit you'll want to repeat some element and ensure that everything looks great together. Even the rooms you're thinking of putting drapes in might benefit from shutters or wood blinds for both looks and light/privacy control. Also be aware of how these windows will look from the outside. When choosing fabrics look at your existing furniture for inspiration or a piece of existing art or if buying new furniture think about the windows as you do. Everything in the room ties into each other. Ideally you would have swatches and samples of every finish in the room from flooring to window coverings and everything in between including wall colour, area rugs, bedding ect to help make your final decisions easier.

I think it is awesome to give a piece of furniture a new life. It is sometimes a bit daunting to take a paint brush to a piece made from genuine old timber but if you are going to get many more years of life and enjoyment out of it I think it is better than dumping it. I believe it shows your love. jbof4 I started with a heat gun to remove most of the many layers of paint, (some are easier than others to strip this way). Then I used an orbital sander and sanded and sanded and sanded. You might also try liquid paint stripper although I find this very messy. I believe you can also get them professionally stripped. Good luck with the resurrection, go for it what have you got to lose.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)

Thanks very much for all your feedback. Just to answer a few queries - the deck is directly outside the main room so the new doors open out onto it. The doors won't be French - they're just the only doors that the 3D planner I'm using had, they'll actually be large stacking doors. I've had another idea too which would be a lot more expensive but offers a completely different approach. This is quite rushed so doesn't show accurate layout of kitchen or anything like that, basically just provides an idea. Thoughts!?