What a nice space Wisteria is so nice !! We are just about to do something to our pergola Polycarbonate roof will be fitted waiting on a man that can !! Ours looks as if its not a strong as yours We also hope to put some sort of guttering on and a water butt Down below to catch the rain water Rains a lot here in cornwall (England ) Will follow your post to see What advise others give Good luck

Thanks for all the great ideas everyone and sorry I didn't explain the polycarbonate a bit better :) This is along the lines of what we'll be using... http://www.psp.co.nz/building-brands/corrugated-sheeting/suntuf-polycarbonate The area is an absolute sun trap and we're hoping to use it as an extension to our living space, especially on rainy days! I've just sent my husband out to get a few pots of different stains for is to try - darkest brown (cedar) and a lighter brown (rustic oak) both by Cabots + the black we already have. Hopefully we can decide between one of those! I probably should have mentioned we will have black aluminium pool fencing running along the top of the second retaining wall - so the real question is do we keep everything black (pool fencing, horizontal fence, retaining walls and pergola) or do we go with a dark (or even light) brown for the pergola and retaining walls.... We just keep going around in circles at the moment. Decisions, decisions! Thanks again :)

Thanks for the replies! My wife suggested we talk to a local real estate agent, so i think that is a good idea... just that Im not sure how helpful they are likely to be if we arent selling yet :) As for saving for our dream house, I dont disagree, however if doing this up nicely over the next ~5 years or so while we live here nets us some extra in the eventual sale, then that of course will help us as well. Interesting thing happened today actually. I got a knock on the door and one of the older neighbours asked if he could take some lemons from the tree. I of course said yes. Anyway he was telling me he had lived in the street for 40 years. I asked him if the house had always looked like this, and he said no that ~30 years ago the old old owner did a massive renovation and pulled off the timber and put up the bricks and gutted the inside of the house. Interesting stuff!

My vote is for the wash but not in bright white and after some selective knot primer in the same tone. You are going to want to selectively primer down about 2/3 of the knots (use a dark white tinted primer), and use a dark white / brown toned off white instead of bright white so the beams still give you dark white on bright - that would be my vote. Consider something like bm stingray tinted primer and wash on the beams. You can add glaze for more working time or put down dropcloths and use water to cut it into a wash. Test it on some other raw wood that has had tannins develop for a few years. Then put it against your white wall - your husband will get the contrast and wood grain but you'll get the quiet palette you were hoping for. They both will have architectural depth and interest.