You can put the TV over the fireplace, not the best situation but the way the room lays out it is the only logical place to put it. If you could you should add one additional layer on your mantel that could extend it out another 4" to deflect the radiant coming from the fireplace. I would also mount it on a slimline mounting bracket and have the bottom of the TV no further than 4" above the mantle. Ideally you want the TV to be in as straight a line as possible with your eyes. You don't want to look up too high at the TV, it's like being at a sports bar. Also if you can snake up the power and the HDMI from the cable there is a box they make that has both in one so it makes for a very clean installation.

Not yet. We actually have JUST engaged an architect to draw up an older school house we are hoping to purchase and use as an addition onto the left hand side of the house. Obviously if that purchase goes through, we will hire the architect to work on both the connection of the new building to the house as well as the front entryway. Here is the floor plan of the house. The small bedroom (bedroom 4) sits directly behind the lounge. We are also thinking about removing part of the wall there so that you would walk into the home and see directly into the lounge or turn slightly right and enter the kitchen.

I would clean up first. Especially the stuff growing in the paving. Then get gardening with pot plants and start experimenting with different plants and the positions. See what you like and if you can keep it alive! Our house has the sun setting over the back fence and we've done a few inexpensive things to reduce that issue (most expensive were outdoor blinds around the verandah) but for most of the year we just don't want to be out there. It is hard work to keep the plants going in summer, there is a lot of sand due to the difficulty in keeping lawn alive and it is just bloody hot. So, that's why I'm saying clean up, start gardening small and see how you go before committing to structures that might not address the real issues you have with the yard. Just my 2 cents! :)

I didn't like any of the stock standard vanities I saw being sold. By chance I happened to see a second hand vanity being sold on FB so I brought it ( see photo). I liked its shape and solid profile but didn't like its colour. I took it to a auto car spray painter and had them spray paint it in Benjamin Moore Kendall Charcoal (a greige grey). They did an awesome paint job with a mirror like finish. I brought a piece of primestone (marble look) for the top, two small towel rails to be fixed in the underside of the vanity that is sticking out so I can hang hand towels on either side. I brought a new tap for it (but kept the vessel basin). I ordered in some new legs for it online because I didn't like the legs on it (see below). Its currently at a joiners getting put together. I've actually enjoyed the process of pulling it all together. Sure by the time it has been put together I probably would have spent the same amount that it would have cost me to do a custom vanity however I think there is something to be said for re-using something a second time round rather than buying into consumerism that abounds us. All up I've spent $1,074 NZD for the vanity, the spray paint job, new legs from www.prettypegs.com, the new towel rails from Reece Plumbing & buying a new Elementi tap. That doesn't include the joiners costs - yet. I needed storage in my vanity. This one fit the bill for me. Good luck with what you choose to do! I am doing a bathroom remodel as well and enjoying it.