You have some good ideas but if you're going to sell soon and aren't planning on taking the soffit out, I would just do some minor changes and keep the cabinets (just add a couple cabinets). I wouldn't move the sink but just get a nice stainless steel sink and update faucet. I'd get a stainless stove vent. Remove the wall on the left of the refrigerator but then just do a small pull out pantry on the right of the refrigerator. And, put a cabinet above the refrigerator and make it look built in. A glass backsplash, can lights on the ceiling and pendants above the penninsula. I think a raised counter will make the kitchen/room feel smaller.

I think we are going to use the white subway tile to keep the budget down as I priced new tiles and it would blow out the budget. Really like the contrast grout idea to add a bit of texture and pattern. My partner is a builder and he loves the reclaimed wood shelf idea as we have a lot of spear old wood left over from the renovation. We have made a dinning table and fire place mantel from it already so it would tie in really well.

Hello Marcelle, I am an interior designer . I can tell you a simple inexpensive way to change the look of your kitchen. Looking at the photo you sent the different cabinet heights , and all the objects on the stove wall are very busy . Your modern house is wanting a cleaner , simple look. I would lower the small cabinets so that the top is at the same height as the others in the room. And put doors on , that will hide the clutter. Next I would do a tile backsplash above the stove , up to the same height. The whole kitchen will be pulled together by the continuous top line. There is a small light wood cabinet with baskets in the foreground . I would paint it white , or the same dark accent color of the cabinets you have. I don't think you would need to change the beams then , they would add interest and drama once everything else was subdued. Lisa

~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.