Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

I would look at this room from 2 angles, in this order: convenience (as you have young kids and need everyone to be able to fully use it) and aesthetics. Equipment and accessories: #1 - first look at what is necessary to have in this bathroom: a place where to keep soap, toothbrushes, toothpaste -- all within easy reach for all users (including not-tall-enough kids) #2 - a cosmetic mirror ? #3 - a towel rail #4 - a small cabinet for storage Ideally, #1 should be stored directly on the sink, as it's lower, within easy reach for the kids (see below photo from one of our baths): You can do this also witha smaller sink, like the one we use in the half-bath: If you'd like to keep the one you have (which is really nice), you'll have then to use a shelf (as also suggested by someone else above), and I'd propose one of white porcelain and not one of glass, as it's a lot less reliable with children around. Below, an example of what I mean. The shelf should be installed as low as possible to be reachable by the kids, but also the mirror should be much lower, so that they can use it (much more interesting for them) without having it too low so the adults can't see themselves anymore. For #2 look on the left of the mirror in this photo (if you need it): A towel rail (#3) is absolutely necessary and make sure it's one where you can stretch the towel for faster drying (like the one in the 2nd photo). The cabinet storage (#4) could be placed on the wall from the right of the mirror, as you can see we have in our half-bath (also 2nd photo): Aesthetics: I agree that blinds on the window make no sense, light should be let to flow in as it's much needed in a bathroom. If you don't have time or disposition to paint the walls (and maybe they should remain white anyway, or a light color, because this is a small space), you might use decorations from your DYI center and stick them on the walls (see an example below from my daughter's bedroom, but there are other smaller ones for any kind of space): This way, the room becomes more attractive, more welcoming and more colorful (with very low cost). I hope this helps :-)

My thoughts would be yes if youwish to make areal feature or white to blend in and leave the tapware as the features, especially if you have no metal finishes in your bathroom. Without knowing anymore, my personal preference would be white. If you can't purchase you could get some powder coated. Lynn

The colonial style in your bottom picture looks nice , but I don't think it would suit your house style . I gather you are older , but the existing colours are from different eras IMO . The burgundy/red colour I like , and although the downstairs windows look quite old , I would paint them the same colour , and the seat too . Upstairs I'd definitely change the window -- the louvres are so dated ! Go a bit bigger if you can , but that may get into structural problems . Have top-hinged opening windows eaither side , and a larger piece of fixed glass in the middle . Either no surround , or a surround to match the downstairs windows and door frame , painted to match . All the roof and side ribbed steel panels I would repaint in a gunmetal grey , and get away from that dark green . The roof on the room to the left I would also do , to 'tie it' in . I'd leave that small roof above the door , and add a roofed gazebbo out the front , with stained or varnished solid wood uprights , and a roof painted in that burgundy red . I would build it to fit onto the lower deck level -- way easier and cheaper to do it that way , as opposed to raising and enlarging the deck . Add a couple of natural timber planters , even a half barrel or two , a shint stainless barbeque , and some charcoal coated aluminium outdoor chairs and a matching glass top table . Personally , I can't imagine a roof / portico attached to the existing house that would suit the style and not make the downstairs ( inside ) too dark . A stand alone roofed timber gazebo would offer the best of both , at a reasonable price . One last idea -- the latticework on the 'fence' -- repaint it an English Off-White , while keeping the rails and posts that burgundy red -- it would add interest and lift it IMO . If you are younger , then go crazy -- bright orange window surrounds , blue/grey render and charcoal roof -- a big round upstairs window , and 6 outdoor chairs , each in a different bright colour !